612626
16
Zoom out
Zoom in
Previous page
1/58
Next page
1-10
1.9 Displaying Station Name
User channels 0-01 to 0-65 can be registered with a name, and it or the Rx frequency can be
displayed on the second line of the display. This function is available when a system setting is
set to display both channel and frequency. See page 3-3 for how to register station name.
1. Press [ENT] and [CURS/2] keys together. Each time those keys are pressed together, Rx
frequency or station name is displayed on the second line of the display.
2. When station name is displayed, you may press the [ENT] key to display Tx and Rx fre-
quency temporarily.
02
4
R
6810
S
TLX
AGC
DUP
Station
Press ENT + CURS
R
02
4
6810
S
TLX
AGC
DUP
RX freq
Note: If no station name is registered,
Rx frequency is soon displayed.
CH No. (Example)
Figure 1-8 How to display Rx frequency and station name alternately
1.10 Transmitting
After selecting class of emission and frequency, you can transmit by pressing the PTT (press-
to-talk) switch on the microphone (handset). (“T” appears when the PTT switch is pressed.
Output power can be evaluated on the operation display. Do not transmit any signal other than
emergency during the silence period, 00 to 03 min, and 30 to 33 min of every hour.
Tuning the antenna
Maximum transmission power is achieved only when the antenna impedance and transmitter
impedance match each other. Because the antenna impedance changes with frequency a means
must be provided to match (tune) the antenna impedance with the transmitter impedance. This
is done with the antenna coupler. The antenna coupler automatically tunes the transmitter to a
wide range of different antenna length (6 – 15 m). To initiate the automatic tuning, do the
following:
1. Press the PTT switch on the microphone (handset), or the [TUNE/7] key.
2. “TUNE” appears on the display.
3. Tuning will be completed within 2 to 15 seconds for a newly selected frequency, or less than
0.5 seconds for a once tuned frequency. (A built-in memory remembers coil and capacitor
settings.)
4. When the tuning process is successfully completed “OK” appears.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-1503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info