Manual Furuno FS-1503 (page 15 of 58) (English)

612626

Zoom out

Zoom in

1/58

1-9

ITU TELEX channels

To select the ITU TELEX channel 4012, for example, first select TLX with the [MODE/1] key.

This radiotelephone is furnished with J2B class of emission. The J2B is compatible with F1B

which may be used on other parties. You do not have to worry about F1B or J2B; you can just

select TELEX mode for narrow-band direct-printing.

Press [CH], [4], [0], [1], [2], [ENT], and a combination of TX frequency of 4178.0 kHz and

RX frequency of 4215.5 kHz is selected with the display as below. To select only RX or TX

frequency, hit [RX] or [TX] to begin.

6810

TLX

AGC

DUP

6810

TLX

AGC

DUP

Rx band

Rx freq ITU Tx CH No.

Tx Band

Identify frequencies by referring to the APPENDIX.

Entering 412 reads 4012 as above. Tx and Rx

frequencies can be read temporarily.

ITU Rx CH No.

Tx freq

When receiving

When transmitting

ITU

Figure 1-7 Sample display of ITU telex channel

• The [CURS/2] key shifts the cursor to band or channel number.

• To change channel number use the [FREQ/CH] control; it changes the number above the

cursor, a band or channel designator.

• The [ENT] key temporarily displays both Tx and Rx frequencies.

• You can recall an ITU channel by entering 3 or 4 digits. To recall ITU telex channel 4012 by

three digits, for example, select “TLX” then enter 412 (instead of 4012).

• Tx frequency/Rx frequency or Tx CH/Rx CH indication can be selected through the system

settings. Ask your dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Furuno FS-1503 Manual

Product: