28338
39
Zoom out
Zoom in
Previous page
1/129
Next page
1. OPERATIONAL OVERVIEW
1-25
1.20.3 Choosing alarm type
As noted earlier the target alarm may be set sound against targets entering or exiting the alarm.
Choose desired type as below.
In and Out alarms
1. Press the MENU key to shown the menu.
2. Choose the Mark menu and press the ENTER key.
3. Choose Target Alarm 1 Mode or Target Alarm 2 Mode as appropriate and press the ENTER
key.
4. Choose “In” to get the alarm on targets entering a target alarm zone or “Out” to alert you to tar-
gets exiting a target alarm zone.
5. Press the ENTER key followed by the MENU key.
1.20.4 Temporarily deactivating a target alarm
You may temporarily deactivate a target alarm when its use is not immediately required. The alarm
zone remains on the screen, however any targets entering (or exiting) it will not trigger the audio
and visual alarms.
1. Press the TARGET ALARM key to choose the ALARM1 or ALARM2 indication at the bottom
right corner on the screen. The selected indication is circumscribed with a rectangle.
2. Press the CANCEL/HL OFF key. The alarm indication now shows ALARM1(or 2)_ACK.
To reactivate a temporarily deactivated target alarm, press the ENTER key with the alarm
zone displayed on the screen. The alarm indication then changes to ALARM1(or 2)_IN(or
OUT).
1.20.5 Deactivating a target alarm
1. Press the TARGET ALARM key to choose ALARM1 or ALARM2 indication at the bottom right
corner on the screen. The selected indication is circumscribed with a rectangle.
2. Press the CANCEL/HL OFF key.
3. Press the TARGET ALARM key again, and a dashed rectangle circumscribes the alarm indi-
cation which now reads ALARM1(or 2)_ACK.
4. Press the CANCEL/HL OFF key again. The target alarm zone and the alarm indication are
erased from the screen.
Inward target alarm
Outward target alarm
In
Out
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR8062 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR8062 in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info