28338
37
Zoom out
Zoom in
Previous page
1/129
Next page
1. OPERATIONAL OVERVIEW
1-23
1.18.2 EBL reference
The EBL readout is affixed by "R" (relative) if it is relative to own ship's heading, "T" (true) if it is
referenced to the north. You may choose relative or true in the head-up modes; in all other modes
it is always TRUE. True bearing requires a heading sensor.
1. Press the MENU key to open the menu.
2. Choose the Mark menu and press the ENTER key.
3. Choose EBL Reference and press the ENTER key.
4. Choose Relative or True as appropriate and press the ENTER key.
5. Press the MENU key to close the menu.
1.19 Measuring the Range and Bearing Between Two
Targets
You may shift the origin of the EBL to measure the range and bearing between two targets.
1. Press the EBL key to choose the
bearing indication of No. 1 EBL or No.
2 EBL (whichever you want to use).
(The currently active marker is
enclosed with >.....<).
2. Place the cursor on target A.
3. Press the OFFCENTER key to shift
the EBL origin to the location chosen
at step 2. Use the trackball to bisect
target B with the EBL.
4. Use the VRM key to display the VRM
having the same number as the EBL
activated at step 1.
5. Roll the trackball to set the VRM on
the inner edge of target B.
6. Read the bearing and range indica-
tions at the bottom of the screen.
To return the origin of an EBL to the
screen center, choose appropriate
EBL with the EBL key, press the OFF-
CENTER key followed by the ENTER
key. Pressing the OFFCENTER key
alone places the EBL origin at the
screen center and cursor location alter-
nately.
Relative
True
No. 1
EBL
No. 2
EBL
EBL1
EBL2
>140.0
°
R<
335.2
°
R
VRM1
VRM2
>0.500NM<
0.980NM
Tgt D
EBL origin
+
+
Tgt B
Range/bearing
between targets A and B
N
o. 1
V
RM
Tgt A
Tgt C
No. 2
VRM
Range/bearing
between targets C and D
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR8062 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR8062 in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info