689491
88
Zoom out
Zoom in
Previous page
1/125
Next page
-5.2-
Terminal strips
and plugs in
antenna unit
Open antenna cover to
check terminal strip and plug
connections inside. Also
check the rubber gasket of
antenna covers for
deterioration.
When closing antenna covers
in position, be careful not to
catch loose wires between
covers and unit.
6 months
to one
year
CRT and
surrounding
components
High voltage at CRT and
surrounding components
attract dust in environment
which will cause poor
insulation. Ask your nearest
FURUNO representative or
dealer to clean internal
high-voltage components.
If CRT anode rubber cap or
wire sheath is cracked, ask
your dealer to replace it. Wait
for at least 3 minutes until high
voltage components (CRT and
HV capacitors) discharge their
residual charges before
accessing them.
Terminal strips,
sockets, earth
terminal
Check for loose
connections. Check contacts
and plugs for proper seating,
etc.
5.2 Life Expectancy of Major Parts
Parts Type Life expectancy Remarks
Antenna motor D8G-571 (X-band) 42 rpm
D8G-571 (X-band) 24 rpm
Gears more than 10,000 h Wind load 100 kt
Magnetron MG5389, X-band, 6 kW
MAF1422B, X-band, 6 kW
MG4006, X-band, 6 kW
MAF1425B, X-band, 12 kW
MG4010, X-band, 12 kW
MG5436, X-band, 25 kW
2,000 - 3,000 h
5.3 Replacement of Batteries
The GYRO CONVERTER Board (option) and the RP Board have a battery. The battery for the RP
Board preserves data when the power is turned off, and its life is about five years. When the
battery voltage of the battery on the RD Board is low, NG (No Good) appears at the diagnostic test
for the RP board. When this happens, contact your dealer to request replacement of the battery.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info