689491
43
Zoom out
Zoom in
Previous page
1/125
Next page
-1.29-
1.30 Markers
Heading line, north marker, stern marker, own ship symbol
The heading line indicates the ship’s heading in all presentation modes. It is a line from the own
ship position to the outer edge of the radar display area and appears at zero degrees on the
bearing scale in head-up mode, it changes the orientation depending on the ship orientation in the
north-up and true motion modes. The heading marker appears as a small circle on the bearing
scale to indicate the heading when the display is shifted or is in the north-up or TM mode.
Temporarily erasing heading line, north marker, stern marker, own ship symbol
To temporarily extinguish the heading line to look at targets existing dead ahead of own ship, press
the GAIN control. The heading line reappears when the control is released.
Note that the Video Plotter screen (requires RP-17) is also temporarily erased when the GAIN
control is pressed.
North marker
The north marker appears as a short dashed line. In the head-up mode, the north marker moves
around the bearing scale in accordance with the compass signal.
Stern marker
The stern marker (a dot-and-dash line) appears opposite to the heading line. It can be
displayed/erased on the MARK/LINE sub menu in the OTHERS menu ([MENU], [0], [0]).
Own ship symbol
The own ship symbol ( ) can be displayed/erased on the MARK/LINE sub menu in the OTHERS
menu. The symbol is scaled to indicate the length and beam of the vessel. If the largest dimension
of the symbol gets smaller than 6 mm, the symbol will disappear and own ship will be represented
with a small dot or circle depending on the range in use. NOTE: Details should be entered during
installation.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info