689491
41
Zoom out
Zoom in
Previous page
1/125
Next page
-1.27-
1.27 Parallel Index Lines
Parallel index lines are useful for keeping a constant distance between own ship and a coastline or
a partner ship when navigating. The orientation of the index lines is controlled with the EBL rotary
control and the intervals between the lines is adjustable with the VRM rotary control (provided that
No.2 VRM is active).
1.27.1 Displaying/erasing the index lines
Press the [INDEX LINE] key to disconnect the VRM. Press the
[INDEX LINE] key to display/erase the index lines.
1.27.2 Selecting number of index lines to display
Maximum number of the index lines can be set for 2 or 6 on the
MARK/LINE sub menu in the OTHERS menu.
1.28 Reference Mark (not available with Video Plotter RP-17 or RP-180)
You can mark any reference points, prominent target or a point of particular interest using the
reference mark feature. This mark is geographically fixed, namely, ground stabilized. Twenty such
reference marks can be entered. Note this feature is inoperative when the RP-17 or RP-180 is
installed.
To use the reference mark:
1. Place the cursor (+) at a point where you want to place a reference mark by operating the
trackball.
2. Press the [MARK] key. The reference mark appears at the cursor position. The cursor
location is indicated on the screen.
1.28.1 Inscribing mark reference
The reference mark can be set relative to own ship, or referenced to land (sea or ground
stabilized).
1. Press the [MENU] key.
2. Press the [8] key twice to select MARK.
MARK
1. ERASE
2. MODE REL TRUE
3. Press the [2] to select the REL or TRUE as required.
4. Press the [ENTER/SELECT] key, then [MENU].
1.28.2 Erasing reference marks
Erasing individual reference marks
Select the Reference mark with the cursor and then press the [CANCEL/CLEAR] key.
Bearing of PI Lines
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info