689491
17
Zoom out
Zoom in
Previous page
1/125
Next page
-1.3-
1.4 CRT Brilliance
Operate the BRILL control on the control panel of the display unit to adjust the entire screen
brightness. Note that the optimum point of adjustment varies with ambient lighting conditions,
especially between daytime and nighttime.
1.5 Control Panel Backlighting
Operate the [DIMMER] key to adjust control panel backlighting.
1.6 Tuning the Receiver
1.6.1 Automatic tuning
The radar is set for automatic tuning at the factory. The radar receiver is tuned automatically each
time the power is turned on. The tuning indicator and the label AUTO at the top right corner of the
display unit show the tuning circuit is working. The receiver may become detuned, in automatic
tuning, if own ship’s radar receives the radar signal of another shipborne radar. To return, press
the [STBY/TX] key twice.
1.6.2 Manual tuning
Press the GAIN control (Push for HL OFF) and adjust the VRM control after setting as below:
1. Press the [MENU] key.
MENU
1. VIDEO PLOT*/ AIS
2. TGT TRAIL
3. TGT ALARM
4. WATCH TIME
5. ECHO SIG
6. FUNC
7. PLOT
8. MARK
9. BRILL
0. OTHERS
OTHERS
1. HDG SET
2. SPD MODE MAN LOG
LOG (S-BT)
LOG (S-WT)
3. MAN SPD
4. SET & DRIFT
5. DISPLAY
6. MARK/LINE
7. TUNE
8. NAV DATA
9. EBL/+/PI
0.
TUNE
1.
2. MODE AUTO MAN
* Requires RP-17 or RP-180. AIS not shown on RP-17.
(a) Main menu (b) OTHERS menu (c) TUNE menu
2. Press the [0] key twice to display the OTHERS menu. (b)
3. Press the [7] key to display the TUNE menu. (c)
4. Press the [2] key to select the option MAN from the MODE field.
5. Press the [ENTER/SELECT] key. While observing the picture on the 48-mile scale, slowly
adjust the VRM rotary control while holding down the GAIN control to find the best tuning
point. Make sure that the radar has been set to the best tuning point. This condition is
where the tuning indicator lights to about 80% of its total length. Note that the tuning
indication will never extend to full length.
6. Press the [MENU] key to close the menu.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info