522142
74
Zoom out
Zoom in
Previous page
1/97
Next page
8-1
8. INSTALLATION
8.1 Transceiver Unit
The transceiver unit can be mounted on a desktop or overhead, or flush mounted in a
panel. Choose a mounting location considering the points mentioned below.
Follow the compass safety distance shown in the safety Instructions to avoid any
interference to the compass from the speaker magnet in the transceiver.
Select a location which provides easy access to the front panel controls.
The location has space for installation of a microphone hanger.
Choose a mounting location that is at least 1 m away from the radio's antenna.
CAUTION: The heatsink can get hot enough to cause a burn injury. Select a
location where it cannot be easily touched.
Note: To insure the radio does not affect the compass and the radio's performance is
not affected by the antenna location, temporarily locate the radio in the desired loca-
tion and:
a) Examine the compass to see if the radio interferes with the compass.
b) Connect the antenna and transmit. Check to ensure the radio is operating correctly
by requesting a radio check.
8.1.1 Desktop or overhead mount
The supplied mounting bracket permits desktop or overhead mounting.
Use a 5 mm bit to drill the holes to a surface that is more than 10 mm thick and can
support the unit’s weight (1.5 kg). Fasten the bracket with the supplied screws, spring
washers, flat washers, and nuts.
Desktop mounting Overhead mounting
www.busse-yachtshop.de | info@busse-yachtshop.de
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info