522142
17
Zoom out
Zoom in
Previous page
1/97
Next page
2. OPERATION
2-6
2.4 Transmit Timeout Timer (TOT)
When the PTT switch on the microphone is pressed continuously, transmit time is lim-
ited to five minutes. This limits unintentional transmissions due to a stuck PTT switch.
About 10 seconds before automatic transmitter shutdown, a warning beep sounds
from the speaker(s). The transceiver automatically goes to the RX mode, even if the
PTT switch is continually held down. To transmit again, the PTT switch must first be
released and then pressed again.
CAUTION: The heatsink can get hot enough to cause fire or burn injury when the TX
to RX ration goes lower than 1:9.
2.5 Simplex/Duplex Channel Use
Refer to the VHF Marine Channel Chart in the Appendix for instructions on use of sim-
plex and duplex channels.
Note: All channels are factory-programmed in accordance with FCC (USA), Industry
Canada (Canada), and International regulations. Mode of operation cannot be altered
from simplex to duplex or vice-versa.
2.6 International, Canada, and USA Mode
To change the channel Group call from International to Canada or USA:
1. Press and hold down the CALL/MENU key until the [Setup Menu] appears.
2. Rotate the CH knob to select [CH Function Setup] then
press the [SELECT] soft key.
3. Rotate the CH knob to select [CH Group] then press
the [SELECT] soft key.
4. Rotate the CH knob to select a channel Group [USA],
[INTL], or [CAN (CANADA)] then press the [ENT] soft key to store the selected
setting.
Note: When in INTL channel group, inland waterways channel group can be se-
lected from the ATIS menu by switching ATIS to ON. See section 6.2.
5. Press the [QUIT] soft key several times to return to radio operation.
2.7 Backlight Adjustment
Adjust the display illumination for viewing in sunlight or darkness.
1. Press the FUNC key followed by the 4/DIM key to show the [Dimmer] menu.
2. Rotate the CH knob to select the desired level. When
[OFF] is selected, the backlight is turned off.
3. Press the [ENT] soft key to store the selected level,
and return to radio operation.
www.busse-yachtshop.de | info@busse-yachtshop.de
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info