522142
16
Zoom out
Zoom in
Previous page
1/97
Next page
2. OPERATION
2-5
2.2 Reception
1. After the transceiver has been installed, ensure that the power supply and anten-
na are properly connected.
2. Press and hold the PWR key until the radio turns on.
3. Rotate the SQL knob fully counterclockwise. This state is known as "squelch off".
4. Rotate the VOL knob clockwise until noise or audio from the speaker is at a com-
fortable level.
5. Rotate the SQL knob clockwise until the random noise just disappears. This state
is known as the "squelch threshold”.
6. Rotate the CH knob to select a channel. Refer to the channel chart in the Appendix
for available channels.
7. The numeric keys on the front panel may be used to directly select channels.
For example, to select CH68:
1) Press the 6/DW key.
2) Press the 8/PA key.
3) Press the ENT key.
In the USA and Canadian modes, press and hold down the 0 key to select the "A"
channel. For example, to select CH22A:
1) Press the 2/MEM key.
2) Press the 2/MEM key.
3) Press the 0 key until "A" appears to the right of the channel number.
4) Press the ENT key.
8. When a message is received, adjust the volume to the
desired listening level. The indicator on the
display indicates communications is being received.
2.3 Transmission
1. Do steps 1 through 6 in section 2.2 "Reception".
2. Before transmitting, monitor the channel to ensure it is
clear.
3. Press the PTT (push-to-talk) switch on the micro-
phone. The indicator appears on the display.
4. Speak slowly and clearly into the microphone.
5. When the transmission is finished, release the PTT switch.
Note: This is a noise-canceling microphone. Position the slot labeled "MIC" within 1.5
cm from your mouth for optimum performance.
www.busse-yachtshop.de | info@busse-yachtshop.de
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info