522208
27
Zoom out
Zoom in
Previous page
1/45
Next page
3. INSTALLATION
19
Junction box (option)
The junction box is required when connecting NMEA 2000 network. This
section covers wiring of the junction box. For how to mount the junction
box, see its installation instructions, issued separately.
CH3 DROP - CH5 DROP and BACKBONE are socket-and-plug-type ter-
minal blocks. Detach plug to connect wiring to it, by rocking it back and
forth with your fingers. Remove approx. 6 mm of the sheath from the end
of wires and twist wires. Loosen fixing screw in the plug, insert wire into
hole and tighten fixing screw. Set plug to socket.
12 VDC
12VDC
CN3
DROP
BACKBONE
FI-501/502/503/504/505/506
NMEA2000
DEVICE
Fix cable with cable
tie (supplied).
CN4
DROP
CN5
DROP
Fixing screw
Hole for wire
Wire
Twist
How to insert wire
6mm
Sheath
How to fabricate cable
White
Red
Blue
Black
Drain wire
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FI-504 MULTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FI-504 MULTI in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info