28282
23
Zoom out
Zoom in
Previous page
1/63
Next page
12
3.2 Selecting the Presentation
Mode
This radar provides four presentation modes:
head-up, course-up, north-up and true motion.
1. Press the [MENU] key.
2. Operate the omnipad to select “MODE”.
3. Press the [ACQ/ENTER] key.
With heading sensor connection the display
and the display mode indication at the top left-
hand corner of the display change in the se-
quence of HU (heading up), CU (course up),
NU (north up) and TM (true motion) when
the [ACQ/ENTER] key is pressed. If there is
no heading sensor connection, the display
mode is always HU.
4. Press the [MENU] key to close the menu.
Note: The radar begins operation with last se-
lected display mode (except course up) when-
ever the unit is turned on. Note however that
head up is selected when course up was the
last used mode.
Head up
The picture is oriented so the heading line is
at the top of the display. This mode is useful
for navigation in congested waters.
Course up
The course up mode shows ship’s heading by
the heading line, at the top of the display. To
get heading desired, steer vessel in direction
desired, and then show “CU” at the top left-
hand corner of the display.
North up
North is at the top of the display and the head-
ing line moves with ship’s heading. This mode
is useful for determining ship’s position and
as a navigation monitor on a nautical chart.
The picture is stabilized against yaw of ves-
sel, thereby reducing of target echoes.
3.1 Basic Menu Operation
The menu mostly contains less-often used
functions which once preset do not require
regular adjustment. To open or close the menu,
press the [MENU] key. You can select items
on the menu with the omnipad. The complete
menu appears on page AP-1.
1. Press the [MENU] key to display the main
menu.
SSel by omnipad & press ENT.S
RINGS
EBL
OFFSET
SHIFT
ZOOM
MODE
DISP
DATA
ECHO
TRAIL
ECHO
STRTCH
ARP-10
MENU
OTHER
MENU
Change brill
from 3 to max.
Figure 3-1 Main menu
2. Press the omnipad to select the item. For
example, select RINGS. A message appears
at the bottom of the menu window.
3. Press the [ACQ/ENTER] key to select set-
ting. Each time this key is pressed,
the message changes. For the RINGS
menu, the message sequence is as shown
below.
Change brill from Off to 1.
Change brill from 1 to 2.
Change brill from 2 to 3.
Change brill from 3 to max.
Change brill from max to Off.
Figure 3-2 Messages for RINGS menu
4. Press the [MENU] key to close the menu.
3. MENU OPERATION
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1942 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1942 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1942

Furuno 1942 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info