28282

Furuno 1942 Manual

21
Zoom out
Zoom in
Previous page
1/63
Next page
10
VRM1
Offset EBL
(EBL1)
6.0 NM
2.0
EBL1 origin
(initial position
of target)
Target moved
here.
EBL1
bearing
70.0° R
VRM
6.0 NM
VRM1
range
EBL
Figure 2-10 Predicting collision course by
using the offset EBL
Measuring range and bearing between
two targets
The procedure which follows shows how to
measure the range and bearing between target
“A” and target “B” in Figure 2-11.
1. Press the omnipad to place EBL1’s origin
(cursor) on the center of target “A”.
2. Press the [EBL/VRM SELECT] key to
choose EBL1 readout and then press the
[EBL/VRM CONTROL] key.
3. Select EBL OFFSET on the menu and press
the [ACQ/ENTER] key. EBL1’s origin shifts
to cursor.
4. Press the [EBL/VRM CONTROL] key.
5. Press the omnipad to bisect target “B” with
EBL1. Check the EBL1 readout to find the
bearing between target “A” and target “B”.
6. Press the [EBL/VRM SELECT] key to
choose VRM1 readout. Press the omnipad
to place the outside edge of VRM1 on the
inside edge of target “B.” Check the VRM1
readout to find the range between target “A”
and target “B”.
7. To cancel, select EBL OFFSET on the menu
and press the [ACQ/ENTER] key.
VRM1
EBL1
bearing
70.0° R
VRM
4.5 NM
VRM1
range
EBL1
A
B
Figure 2-11 Measuring the range and bearing
between two targets by using the offset EBL
2.15 Shifting (off centering) the
Picture
Your vessel’s position can be shifted up to 75%
of the range in use to view the situation around
your vessel without changing the range or size
of targets.
1. Press the omnipad to set cursor where de-
sired.
2. Press the [F1 (A/C SEA)] control if its func-
tion is set for SHIFT (default setting), or se-
lect SHIFT on the menu. OFFCENTER
appears at the top right corner of the display
when the picture is shifted.
Cursor Cursor
1 Place cursor
where desired.
2 Press SHIFT ZOOM
key to off center display.
Figure 2-12 Shifting the picture
Cancelling shifted picture
Press the [F1 (A/C SEA)] control again.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1942 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1942 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1942

Furuno 1942 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info