28276
25
Zoom out
Zoom in
Previous page
1/46
Next page
3-6
(If the navigation input includes destination
data, the waypoint marker, shown by a
dashed ring with a line extending from it to
the screen center appears. This marker can
be turned on/off the OTHER MENU)
To turn navigation data on or off;
1. Press the [MENU] key.
2. Select DISP DATA.
3. Press the [ACQ/ENTER] key.
4. Press the [ACQ/ENTER] key to select the
navigation display.
5. Press the [MENU] key to close the menu.
HDG 234.5¡
SP
HU
. 125
NM
.
0625
TRAIL
30M
ZOOM
ES1
AUTO
25:38
G (OUT)
VRM
0.048NM
0.100NM
13.5 R¡
0.142NM
A/C
AUTO
EBL
345.6 R
23.0 R
¡
¡
Waypoint Marker
Navigation
Data
OWN SHIP
34¡ 56. 12N
135¡ 34. 56E
SPD 35.0KT
WAYPOINT
0.09 NM
50.0¡M
TTG 00:20
+ CURSOR
34¡ 29. 98N
136¡ 35. 77E
TTG 01:00
Figure 3-10 Typical navigation data display
Turning on watchman
1. Create a guard zone (usually 360 de-
grees) with the guard alarm function.
2. Press the [MENU] key.
3. Select OTHERS MENU.
4. Press the [ACQ/ENTER] key.
5. Select 15. Watchman.
6. Operate the omnipad to select watchman
rest period; 5 minutes, 10 minutes or 20
minutes.
7. Press the [ACQ/ENTER] key.
8. Press the [MENU] key to close the menu.
WATCHMAN appears at the top of the
screen, the radar transmits for one minute to
check for targets inside the guard zone, and
then the CRT shuts off and the radar goes
into stand-by.
Cancelling watchman
Go into the OTHERS menu, and set 15.
Watchman for OFF.
Note 1: Watchman can be used without a
guard zone.
Note 2: The alarm sounds just before the ra-
dar starts or stops transmitting.
3.9 Displaying Navigation Data
Navigation data can be displayed at the
screen bottom if this radar receives naviga-
tion input in IEC 61162 format. Navigation
data includes
¡ Position in latitude and longitude or Lo-
ran-C time differences
¡ Range, bearing and time-to-go to both
waypoint selected on the navigator and
the cursor
¡ Speed.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1932MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1932MK2 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info