28276
21
Zoom out
Zoom in
Previous page
1/46
Next page
3-2
North up
North is at the top of the display and the head-
ing marker moves with ships heading. This
mode is useful for determining ships posi-
tion and as a navigation monitor on a nauti-
cal chart. The picture is stabilized against yaw
of vessel, thereby reducing smear of target
echoes.
True motion
True motion displays own ship and moving
objects in their true motion.
3.3 Magnifying Long Range
Echoes (echo stretch)
Normally, the reflected echoes from long
range targets appear on the display as
weaker and smaller blips even though they
are compensated by the radars internal cir-
cuitry. The echo stretch function magnifies
these small blips in all ranges. Two types of
echo stretch are available: ES1 which
stretches echoes in bearing direction and
ES2 which stretches them in both range and
bearing directions.
To turn the echo stretch on or off;
1. Press the [MENU] key to open the menu.
2. Select ES.
3. Each press of the [ACQ/ENTER] key
changes the echo stretch function status
in the sequence of ES1, ES2 and OFF.
ES1 or ES2 appears at the top right-hand
corner of the display when echo stretch
is on.
Bearing
direction
Bearing
direction
Range
direction
Echo stretch 1
Echo stretch 2
Figure 3-3 Echo stretch
Note1: This function magnifies not only tar-
gets but also sea clutter and radar interfer-
ence. For this reason be sure the sea clutter
and radar interference are sufficiently sup-
pressed before activating the echo stretch.
Note2: ES2 is not available on short range.
3.4 Echo Trail
You can show the movement of all radar tar-
gets relative to your vessel in afterglow. This
function is useful for alerting you to possible
collision situations.
Starting echo trail
1. Press the [MENU] key to open the menu.
2. Select ECHO TRAIL by the omnipad.
3. Select ACTIVATE by pressing the [ACQ/
ENTER] key.
Figure 3-4 How the echo trail feature works
TRAIL, the echo trail time selected (on
OTHERS MENU) and elapsed time appear
at the top right-hand corner of the display.
Then, afterglow starts extending from all tar-
gets.
Note: Trails are restarted when range or
mode is changed or zoom or offcenter is
turned on.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1932MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1932MK2 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info