28276
16
Zoom out
Zoom in
Previous page
1/46
Next page
2-5
2.10 Erasing the Heading
Marker, North Marker
The heading marker or north marker (avail-
able with gyrocompass connection) may oc-
casionally mask a target. To view the target,
you can temporarily erase the heading
marker and north marker by pressing and
holding down the [GAIN (HM OFF)] control.
Release the control to re-display the mark-
ers.
Heading
marker
North
marker
Figure 2-5 Heading marker and north marker
2.11 Measuring the Range
You can measure the range to a target three
ways: by the range rings, by the cursor, and
by the VRM (Variable Range Marker).
Measuring range by range rings
Count the number of rings between the cen-
ter of the display and the target. Check the
range ring interval and judge the distance of
the echo from the inner edge of the nearest
ring.
Measuring range by cursor
Operate the omnipad to place the cursor in-
tersection on the inside edge of the target
echo. The range to the target, as well as the
bearing, appears at the bottom of the display.
Measuring range by VRM
1. Press the [EBL/VRM SELECT] key to cir-
cumscribe a VRM readout (at the bottom
right-hand corner). Each press of the key
selects the readout of EBL1, EBL2, VRM1
or VRM2 in that order.
EBL
345.6°R
23.0°R
VRM
5.3°NM
12.5°NM
Figure 2-6 Display bottom, showing
location of EBL and VRM readouts
2. Press the [EBL/VRM CONTROL] key to
enable control of the VRM by the
omnipad.
3. Operate the omnipad to place the outside
edge of the VRM on the inside edge of
the target. The omnipad must be oper-
ated within five seconds after pressing the
[EBL/VRM CONTROL] key, otherwise the
VRM cannot be operated.
4. Check the VRM readout at the bottom
right-hand corner of the display to find the
range to the target.
5. To anchor the VRM, press the [EBL/VRM
CONTROL] key.
To erase the VRM, press and hold down the
[EBL/VRM CONTROL] key about two sec-
onds.
VRM1
VRM2
6.0 NM
2.0
Range
Range ring
interval
Target
Cursor
Cursor range
4.0 NM
VRM
4.0 NM
3.0 NM
VRM1
range
VRM2
range
Figure 2-7 Measuring range by the cursor,
range rings and VRM
Note: You can display the range readout of
the VRM and cursor in nautical miles, stat-
ute miles or kilometers. For details see the
next chapter.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1932MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1932MK2 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info