522147
215
Zoom out
Zoom in
Previous page
1/252
Next page
7. MAINTENANCE, TROUBLESHOOTING
7-5
7.4.3 Plotter
Requires GPS Receiver GP-310B/GP-320B.
Plotter troubleshooting
If… Then…
position is not fixed
within three minutes
check that antenna connector is firmly fastened.
check number of satellites received, on the GPS status display. (See
page 7-11.) There should be three or more.
position is wrong
check that the correct geodetic chart system is selected, on the GPS
SENSOR SETTINGS menu.
enter position offset, on the GPS SENSOR SETTINGS menu.
the track is not plotted
track is not being plotted. (“H” icon appears at the top of the display.)
Press the B:TRACK HALT soft key on the TRACKS & MARKS
CONTROL menu to start plotting again.
the bearing is wrong
check that correct magnetic variation is entered, on the GENERAL
SETUP menu.
Loran C (or Decca)
TDs do not appear
check that LORAN C (or DECCA) is selected at TD DISPLAY on the
GENERAL SETUP menu. Also, check that proper Loran C (Decca)
chains codes are entered, on the TD SETUP menu.
Loran C (or Decca)
TDs are wrong
enter TD offset, on the TD SETUP menu.
the ship’s speed
indication is not zero
after the ship is
stopped
try to decrease speed/course smoothing, on the GPS SENSOR
SETTINGS menu.
offered by Busse-Yachtshop.de
215


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1823C-BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1823C-BB in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info