522147
214
Zoom out
Zoom in
Previous page
1/252
Next page
7. MAINTENANCE, TROUBLESHOOTING
7-4
7.4 Simple Troubleshooting
This section provides simple troubleshooting procedures which the user can
follow to restore normal operation. If you cannot restore normal operation do not
attempt to check inside the unit. Any trouble should be referred to a qualified
technician.
7.4.1 General
General troubleshooting
If… Then…
you cannot turn on the
power
check for blown fuse.
check that the power connector is firmly fastened.
check for corrosion on the power cable connector.
check for damaged power cable.
check battery for proper voltage output (10.8 to 31.2 V).
there is no response
when a key is pressed
turn off and on the power. If there still is no response the key may
be faulty. Request service.
7.4.2 Radar
GD-1900C-BB requires a network radar.
Radar troubleshooting
If… But… Then…
you pressed the
[POWER/TX] key and the
D:RADAR TX soft key to
show the radar picture
nothing appears on the
display
check that the antenna cable is
firmly fastened.
check if radar source is correct.
marks, legends appear no echo appears check Tx fuse in power cable.
If it is blown, replace it.
the picture is not updated or
it freezes
check antenna cable.
for freeze up, turn
the
processor unit on and off
again.
tuning is adjusted sensitivity is poor magnetron may need to be
replaced. Contact your dealer.
the range is changed radar picture does not
change
try to hit the [+] and [-] keys
again.
turn the processor unit off and
on again
.
there is poor discrimination in
range
adjust A/C SEA.
the true motion presentation
is not working properly
reselect true motion mode.
check if heading and speed are
input.
the range rings are not
displayed
hit the B:RADAR DISPLY and
C:RINGS soft keys to display
them.
offered by Busse-Yachtshop.de
214


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1823C-BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1823C-BB in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info