28328
32
Zoom out
Zoom in
Previous page
1/43
Next page
3. INSTALLATION
25
3.2 Display Unit Installation
Mounting considerations
When choosing a mounting location for the
display unit, keep in mind the following points:
Keep the display unit out of direct sunlight.
The temperature and humidity should be
moderate and stable.
Locate the unit away from exhaust pipes
and vents.
The mounting location should be well
ventilated.
Mount the unit where shock and vibration
are minimal.
Keep the unit away from electromagnetic
field-generating equipment such as motors
and generators.
For maintenance and checking purposes,
leave sufficient space at the sides and rear
of the unit and leave slack in cables.
Separate the display unit from a magnetic
compass unit by the distances noted below
to prevent interference to the magnetic
compass:
Standard compass: 0.6 m
Steering compass: 0.4 m
Be sure the mounting location is strong
enough to support the weight of the unit
under the continued vibration normally
experienced on the boat.
Mounting
The display unit can be mounted on a
desktop or overhead or flush mounted in a
console.
Desktop, overhead mounting
1. Fix the hanger to the mounting location
with four tapping screws (supplied).
2. Fit the knob bolts to the display unit.
3. Set the display unit to the hanger.
4. Tighten the knob bolts securely.
Flush mounting
Cutout a hole in the mounting area, referring
to the outline drawing at the back of this
manual for dimensions. Fasten the display
unit with four screws (M4 x 20, supplied).
3.3 Wiring
Connect the antenna cable, the power cable
and the ground wire as shown below.
FUSE (5 A)
POWER SUPPLY
12/24 VDC
POWER CABLE
DISPLAY UNIT
ANTENNA UNIT
ANTENNA CABLE
*
WHT (+)
BLK (-)
External Equipment
(NMEA)
GROUND
Connect ground
wire to bolt fastened
(or welded) to hull.
* = Do not confuse the
antenna cable with the
transducer cable
for the Echo Sounder
(ex. LS-6100). The transducer
cable is black; the antenna
cable is white and "RADAR"
is written on the cable.
DJ-1
DJ-1
NMEA
NMEA
2
2
3
3
1
1
POWER
POWER
12-24 VDC
12-24 VDC
Wiring
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1715 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info