596219
9
Zoom out
Zoom in
Previous page
1/27
Next page
3
Caution
Cable clamp
Rotation detector
Shield plate
Figure 6 Antenna unit, inside view
Caution:
Be careful not to pinch the
rotation detector cable when remounting
the shield plate.
7. Pass the antenna cable with connector
through the gasket and cable clamp, and
then tighten cable gland.
Be sure the shrink tubing on the antenna
cable is not covered by the gasket.
Rubber gasket
Gasket
Cable Gland
Sectional view
Mounting base
Rubber gasket
Figure 7 Antenna unit, inside view
8. Referring to Figure 8, fasten the shield
cable with screw (M4x10) on the chassis to
ground the unit.
Connect 9 pin
connector
here (J801).
Connect
shield here.
Figure 8 How to connect the antenna cable
to the antenna unit
9. Attach EMI Core (supplied) to antenna
cable. Set the fixing band to the EMI core.
This bend should be
facing toward you.
Fixing band
Figure 9 Fixing band
10. Referring to Figure 8, connect the 9-pin
connector of the antenna cable to J801.
11. Refasten the shield plate with 10 screws.
Be sure not to pinch cable from the rotation
detector with the shield plate. See “Caution”
in Figure 6 for details.
12. Fasten the Fixing band with Screw
(supplied).
Screw(M4X15)
EMI Core
Fixing
Band
Align bend with
corner of chassis.
Figure 10 How to fix the EMI Core
13. Follow the instructions on the label inside
the mounting base to secure the snap assy.
14. Confirm that the rubber gasket is properly
positioned and that the triangle mark on the
radome cover is aligned with the triangle
mark on the mounting base, then tighten
the fixing screws for the cover. Refer to
Figure 7 for positioning of rubber gasket.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1712 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1712

Furuno 1712 User Manual - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info