68173

Funkwerk CS410 Manual

59
Zoom out
Zoom in
Previous page
1/103
Next page
Deactivating call rerouting
The following example describes how to set up MSN 1 for permanent call forwarding.
a
Msssss
Setting Call
rerout.
Off Fixed MSN-1
Special features for the Swiss version
In the default setting the telephone is designed for being operated at the internal ISDN port of a pabx. If you wish to
useyourtelephone at thenetworktermination unit orat a third-partypabx, you will have to changethe call rerouting
protocol (»Keypad« or »ETSI«) as described below.
Use at a point-to-multipoint connection (network termination unit)
a
Mss
t
O>ss
Configu
-
ration
Service
Telephone
PIN
Swiss_
Var
keypad
Use with a PABX
a
Mss
t
O>ss
Configu
-
ration
Service
Telephone
PIN
Swiss_
Var
ETSI
Call waiting
If, during an ongoing call, a second call comes in for you, the second call is signaled when »Call wait. protect. on« is
set. A caller will hear the busy signal, when you have set your telephone to »Call waiting off«.
A waiting call is indicated by a brief acoustic signal in the speaker and also displayed. You can set the volume of the
call waiting signal and select whether a waiting call is to be signaled only one time, or several times (see page 50).
Whenthefunction»Silentsignalling«isactivated, callsignallingiscarried out as described for thisfeature. Ifyouare
using the hands-free option for an active connection, waiting calls will only be signaled optically in the display.
The following entries are possible for the call waiting feature:
Begin as follows:
a
Mss
Setting Call wait.
s Pressthe appropriate softkey below the desired call waiting type.
The check mark next to a softkey indicates which setting is cur
-
rently activated for selectionin the first line. When there are vari
-
ous settings possible, first select the variant frm the first line and
then the function from the lower lines. Repeat these steps until all
variants are set.
Call waiting
enable?
--internal=external--
No
ok
OK,extended
s
internal, external,
internal = external
You can select the settings to be used for call waiting; internal only, externalonly, or inter
-
nal and external.
s
No:
With an ongoing connection or while a connection is being established, no further calls
will be signaled.
s
ok:
line Call waiting from only one subscriber is possible when:\line Only one or two active
connections and no call waiting connection is present at your phone.
s
OK, extended:
Up to 4 simultaneous connections are possible on your telephone.
For example, two further calls can also be signaled by call waiting while two other calls are
already in progress.
Acoustic Settings
55
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info