68173
57
Zoom out
Zoom in
Previous page
1/103
Next page
Direct call
You can program a direct call for your telephone so that when youpress any key (except for ESC andthe menu key) a
set number will be dialed. If the automatic call function is active only one connection can be established to the set
number. If you wish to establish a connection to a different number you must first deactivate the direct dial-in
function.
AnactivedirectcallisprotectedbymeansofthetelephonePIN(seepage60).Thedirectcallfunctioncanthenonlybe
deactivated after entering this PIN. As long as the PIN is set to »0000« (default setting), you do not need to enter the
PIN and can continue by pressing OK.
The following functions are possible with the automatic dial-in activated:
·
Automatic dialing of the set number after lifting the handset of your phone, or pressing any key
(except for ESC and the F-menu key).
·
Accepting calls, provided these are not suppressed by the call filter.
·
Signaling of previously programmed appointment reminders.
Information:
Further functions (e.g.: function keys, TAPI functions or headset operation) are not possible when direct dialing is
activated.
Programming an automatic call number
Begin as follows:
a
Ms s s
Setting Direct cal MSN ext.
t
O
Enter the telephone number.
In this example: »098765«.
Confirm your entry with OK.
Dir. call-in number
Direct cal>098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Information:
If you are using your telephone with a PABX system without direct exchange line access, first enter the line access
digit to obtain external line access followed by the automatic dial-in number.
Activating direct call
a
Ms s s
Setting Direct cal ok
Direct dialing is now activated. The set direct call number is
shown on the second line of the display.
07:41 Dir. call
098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Deactivate direct dial-in
M Thephoneis in the idle mode with the direct call-in feature enab
-
led.
Press the menu key.
07:41 Dir. call
098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Acoustic Settings
53
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info