68173

Funkwerk CS410 Manual

26
Zoom out
Zoom in
Previous page
1/103
Next page
number or name of the desired party. As soon as you accept this information (by picking up the handset, for
example), the selected party is called automatically.
Automatical recall to busy subscriber (CCBS)
Youhear the busy signalwhen callingthe extensionof the person you are trying to reach. »Completion of call tobusy
subscriber« allows you to call the extension as soon as the other subscriber hangs up his or her telephone.
Automatic completion of calls on no reply (CCNR)
When you call the desired number you always get a ringing signal, but the party is not near the phone or does not
answer. Usingthefunction»Completion of callonnoreply«youcanreachthepartyimmediatelywhenhe/sheendsa
call, or lifts and then replaces his/her handset.
Programming completion of call to busy subscriber
btg
s
a
Dial number Subscriber busy or does
not answer
Clbckbusy
The»Clbckbusy«softkeyisonly displayed, when automatic completion of calls are possiblewith theexchangeoffice
or with the pabx. The features »Recall to busy subscriber« or »Recall on no answer« must be applied for at your
service provider for external call-backs.
You can configure three call-backs at a time. If you are using an LCR procedure (e. g. the LCR procedure of the
phone), the »Completion of call to busy subscriber« function is carried out automatically via your standard network
service provider.
Information:
If automatic redialing is active, the »Clbckbusy« softkey is shown on the display. Press the right arrow button or
the »Continue« softkey, to return to the normal idle state display.
Viewing and clearing call-back calls
When the phone is in idle, any call-back calls that are initiated can be viewed in the display by pressing the softkey
»Clbckbusy«. Press this softkey to view the call-back calls. You can then view the individual completion calls using
the arrow keys. If you wish to delete a call completion, select this call using the arrow key and then press the menu
key, followed by the »delete?« softkey.
All completions of call are automatically deleted after a predefined period. This time is setby the service provider for
external call-backs and by the PABX system for internal call-backs.
Information:
If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the ISDN connector of
the phone or by switching off or resetting the pabx), all requested call completions will be lost.
Parking a call (not with IP-S400)
The parking function allows you to interrupt a call for up to three minutes. You can then unplug the plug-in
connector for your ISDN system telephone from the ISDN jack and plug it in in a different room. You can continue
with the previous call after »unparking« it. Or you can »unpark« the call at a different phone and continue your call
there.
Parkingis only possible when only one connection is currentlyactive with your telephone. Afteryouunpark the call,
the number for the parked subscriber will no longer be shown.
A »parking code« (0. . . . 99) is used to ensure that you are returned to the proper call when two calls are parked. The
default parking code is 55.
Information:
If you park two calls on anISDN bus this bus is then disabled for further calls. Unparking is possible only on the bus
on which the call was also parked. Parking is only possible when only one connection is currently active with your
telephone.
Making Calls Parking a call (not with IP-S400)
22
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info