68173
25
Zoom out
Zoom in
Previous page
1/103
Next page
g
L
As soon as a telephone accepts the message, the connection is
established.
Press the open listening/hands-free button to end a message.
| Message 22
00.24 MSN-1
Display
memo
Intercom
The intercom function allows you to establish an internal connection to another system telephone without the called
systemtelephonehavingto accept the callactively(lift up handset,handsfree calling/activate open listening). Thisis
a call in which both parties can speak to one another.
As soon as the system telephone has accepted the intercom call, the connection is established. If one of the parties
picks up the handset during an intercom call, the call becomes a standard type of call.
Information:
Foran intercomcall, enterthe internal numberof theparty youwish to call. You also only need to enter theinternal
number with direct exchange line access. e.g. »22« instead of »*22«.
When an intercom call comes in for your system telephone, the number or the name of the calling party appears in
the display. The intercom call can be terminated at any time by pressing the ESC key. Intercom calls are accepted
automatically by activating the »Hands- free« feature when:
·
the telephone is idle,
·
the intercom feature has been enabled for the pabx (control by means of the »Enabling intercom«
function key).
·
the »Silent signalling« function is not activated.
Intercomcalls canalso bereceived even if the »Station guarding«function is active when the »Enable intercom calls«
function key has been programmed and is activated.
You can initiate intercom calls using the following procedure, or using a programmed function key.
Information:
You can only utilize this function if the intercom feature for system telephones has been enabled in the pabx for
your MSN extension number.
Begin as follows:
a
Ms>s
Acoustic Intercom
t Enter the telephone number, for which the intercom function is
to be activated, or select an entry from the telephone directory.
| Speak to
MSN-1
Tel. drctry
g
L
The connection is set up when the telephone has accepted the in
-
tercom function.
To end the intercom function, press the open liste
-
ning/hands-free key.
| Intercom 22
00.25 MSN-1
Display
memo
Automatic completion of call
Using the automatic completion of call to busy subscriber feature, you can reach a subscriber whose line is busy or
who is not near his or her telephone. You are then notified that the subscriber for which recall has been configured
can now be reached. You receive this information from the exchange office for external call-backs and from the
PABX system for internal call-backs.
The telephone display then indicates »Autom. callback«. This display alternates every 2 seconds between the
Intercom Making Calls
21
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info