68173
8
Zoom out
Zoom in
Previous page
1/103
Next page
·
Only use approved accessories.
·
Only terminals with SELV and/or which comply with ETS 300047 may be connectedto the unit.
This regulation is fulfilled when approved terminal devices are used as intended.
Plug-in power supply
·
Use only approved power plug-in units (DSA-0101F-05 UP or L15 D52 AB DDLAWO).
·
Do not use power plug-in units with visible defects or damage (fissures, cracks, etc.)
Elektrostatic charges (protection against electrostatic charges)
ThetelephoneissuppliedwithenhancedESDprotectionagainsttheeffectsof electrostatic discharge that exceeds the
protection level cited in the approval specification. Elevated ESD levels should nevertheless be avoided to the
greatest possible extent. In some cases, electrostatic discharge levels can far exceed the approval limits or the
resistance levels already implemented in your telephones. Eliminate the causes or conditions that promote these
elevated ESD levels, such as insufficient humidity or carpeting. The telephone manufacturer does not assume any
liability for damage caused under such circumstances.
Unpacking and placing the telephone
Unpacking
·
System telephone
·
Handset with handset connecting cord
·
2 feet
·
1 ISDN connecting cord, approx. 6 m (not with IP-S400)
· Cat.5connecting cord, approx. 2 m (only with IP-S400)
·
PC-Connection cable / USB cord , approx. 3 m (not with CS400 and IP-S400)
·
PC-audio cable, 3.5 mm stereo jack,approx. 2,5 m long (notwith CS400 and IP-S400)
·
Adapter cord for headset with a4 pin connectingcord (8pin/4 pin)
·
Cable holder (self-adhesive after removing the film) (notwith CS400)
·
Operating instructions and labels for function keys
Supplement with telephone safety instructions
·
WIN-Tools CD-ROM with:
Professional Configurator, telephone directory-, download- and sound manager,
TAPI-, USB-, CAPI- and NDISWAN driver, Adobe Acrobat Reader,
Operating instructions and Adobe Acrobat file for the printing of individual labels
Placing the telephone
Beforeinstallingthetelephoneyoumustmounttherearfeetforthetelephoneatthepositions(6)showninfigure1.
Please note that the feet of your telephone may leave marks on sensitive surfaces, such as furniture. The
manufacturer of the telephone is not liable for any such damage. Therefore, use appropriate non-skidding pads
under the phone.
Cleaning the telephone
The ISDN system telephone has been manufactured for normal, everyday use. When required, clean the ISDN
systemtelephone with a slightly moistened cloth, or with an anti-static cloth. Neveruse a solvent to clean the phone!
Never use a dry cloth; electrostatic charges could damage the electronics in the system. It is essential that no liquids
penetrate into the inside of the ISDN system telephone, as this could destroy the phone.
Connecting the telephone (connecting and handset cords)
Please connect the ISDN cable and the handset cable. Otherwise you will not be able to operate the phone.
Description and installation Safety notes
4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info