68173
5
Zoom out
Zoom in
Previous page
1/103
Next page
You can connect the system telephone at the internal S0, Up0 or Ethernet connection of a pabx system. The
telephone provides system features when connected to certain elmeg PABX systems. For example:
·
Dialing from the pabx telephone directory
·
Sending and receiving SMS messages
·
Messaging and intercom callswith other system telephones connected to the pabx.
·
Function keys for controlling special PABX features (switching call modes, team log-in/off, line
buttons, extension buttons).
The status of the programmed features can be displayed by means of LEDs assigned to the specific
function keys.
·
Accessing the PABXsystem menu. Thismenu provides further pabx features.
The internal connection of the PABX systems automatically interfaces with the system telephone. Pleaserefer to the
operating instructions of your PABX to determine whether these typical system features are provided with the
various system telephones.
CS400 / CS400xt
This system telephone is delivered with a key extension module (T400/2), providing you with 10 additional, freely
configurable keys.
It is designed for connection to an internal S0 port (4-wire cable) of a PABX system. The system telephone is not
equipped with a USB or serial port for configuration or other uses. This phone must be configured via the internal
ISDN port using the WinTools Professional Configurator. There are also no »Audio functions« implemented and
you can not use the Answering machine or Up0 modules or functions. None of the functions for this module are
shown in the display, nor can they be used.
This telephone is equipped with the function »Emergency operation«. »Off« = Emergency operation off, »On« =
Emergency operation On. meaning it can be operated at NT via the PABX
system on a loss of 230 V~ power. If more than one telephone is connected to
the ISDN system, the emergency operation function may only be configured
on one of the ISDN system telephones. All calls are signaled at this phone.
The volume of the ringing tone is set to low.
In addition to making normal calls, the following functions are also available:
·
Selection of a call number from the telephone directory or the speed dial memory after lifting the
handset.
·
Display of call duration and costs.
·
Mute.
·
Terminate call.
The phone number (MSN) that the network service provider assigned to you as the first (master) number will be
transmitted to external subscribers. Charge billing is effected for this. Observe the information concerning
emergency operation in the PABX system. Ongoing connections are interrupted in the event of a power failure.
Information:
Refer to the operating manual of your PABX system to see if your system supports emergency operation.
Description and installation
1
OFF
ON
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info