503729
40
Zoom out
Zoom in
Previous page
1/84
Next page
40
EN
Dubbing Mode
You can copy a DVD disc to a videotape or copy a videotape
to a DVD disc. This function will be possible only if the DVD or
the videotape is not copy protected.
Before dubbing, prepare for the recording on the DVDs or the
videotape. See pages 28-29 (DVD) or page 71 (VCR).
The videotape’s record tab is intact.
The videotape is long enough to record the DVD disc.
The DVD disc is satisfied with the recording status. See
pages 28-29.
Insert a disc and a videotape with a record tab.
1 In stop mode, press [SETUP]. Select “General
Setting” using [K \ L], then press [ENTER\OK].
2 Select “Recording” using [K \ L], then press
[ENTER\OK].
3 Select “Dubbing Mode” using [K \ L], then
press [ENTER\OK].
Option window will appear.
4 Select “VCR A DVD” using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit.
6 Press [VCR].
7 Press [PLAY B], and then press [PAUSE F]
where you want to start recording.
8 Press [DVD].
Make sure to select a recording speed using
[REC SPEED]. (See page 28.)
9 Press [DUBBING].
VCR to DVD duplication will start.
10 Press [STOP C] to stop the recording.
Note for VCR to DVD duplication:
During duplication, recording will be paused when a
signal other than PAL or SECAM is detected. (See
“Video Colour System” on page 37 for details.)
After starting VCR to DVD duplication, the picture may
be distorted because of the auto tracking function. This
is not a malfunction. Be advised to play back the tape
until the picture is stabilised, then set the starting point
at which you want to start recording, and start VCR to
DVD duplication.
This unit will automatically stop the duplication if
playback with no image detected for more than 3
minutes during VCR to DVD duplication.
If the playback sound mode of VCR is set to “STEREO”,
“LEFT” or “RIGHT”, the sound mode upon dubbing is
automatically switched to “STEREO”. If the playback
sound mode is set to “MONO”, the sound mode upon
dubbing is also “MONO”.
If you set “External Input Audio” to “Stereo”, the sound is
recorded in “Stereo” (video mode and VR mode).
While in video mode, if you set “External Input Audio” to
“Bilingual”, the audio set in “Bilingual Recording Audio”
mode is recorded. While in VR mode, if you set
“External Input Audio” to “Bilingual”, bilingual audio is
recorded.
The main and sub audio will be simultaneously recorded
(VR mode). You can select audio modes during
playback.
If you want to watch the duplicated material, after the
VCR to DVD duplication, press [DVD] first then press
[PLAY B].
4 Select “DVD A VCR” using [K \ L], then press
[ENTER\OK].
5 Press [SETUP] to exit “Setup” menu.
6 Press [DVD].
7 Press [PLAY B], and then press [PAUSE F] at
the point you want to start recording.
8 Press [VCR].
Make sure to select a recording speed using
[REC SPEED]. (See page 71.)
Rewind or fast forward the tape to the point where you
want to start recording.
9 Press [DUBBING].
DVD to VCR duplication will start.
10 Press [STOP C] to stop the recording.
Note
NTSC dubbing is prohibited in this unit.
Dubbing mode is available only if the tape or disc is not
copy-protected.
You cannot change the output mode during VCR to DVD or
DVD to VCR duplication.
If you want to watch the duplicated material, after the DVD to
VCR duplication, press
[VCR]
first and then press
[PLAY B]
.
When “DV” is selected as input, DUBBING function cannot
be performed. DUBBING can be performed with either AV1
or AV2 inputs.
Note for recording to a videotape:
Note for recording to a disc:
VCR to DVD
General Setting
Auto Chapter
Recording Audio Select (1H)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Bilingual Recording Audio
External Input Audio
Playback
Display
Video
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
Recording
Video Colour System
Dubbing Mode
VCR DVD
DVD VCR
DVD to VCR
General Setting
Auto Chapter
Recording Audio Select (1H)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Bilingual Recording Audio
External Input Audio
Video Colour System
Playback
Display
Video
Clock
Channel
DivX
HDMI
DVB Setting
Reset All
Recording
Dubbing Mode
VCR DVD
DVD VCR
40


Need help? Post your question in this forum.

Forumrules
1

Forum

funai-wd6d-m101

Reset search

  • Can this machine be connected to a Mac computer presumably via the USB port Submitted on 27-4-2023 at 13:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai WD6D-M101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai WD6D-M101 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WD6D-M101

Funai WD6D-M101 User Manual - German - 84 pages

Funai WD6D-M101 User Manual - Dutch - 85 pages

Funai WD6D-M101 User Manual - Italian - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info