503729

Funai WD6D-M101 Manual

38
Zoom out
Zoom in
Previous page
1/84
Next page
38
EN
Press [VCR].
Insert a videotape with a record tab into the
cassette compartment.
3 Select the input terminal to which the external
equipment is connected (AV1 or AV2).
Press [INPUT SELECT] repeatedly to select the external
input mode, then press [PROG. G\H] repeatedly to
select AV1 or AV2.
4 Select a recording speed using [REC SPEED].
Refer to “Recording Speed” on page 28 for DVD or page
71 for VCR.
5 Press [RECORD I] (DVD / VCR) on the unit to
start recording.
6 Press the [PLAY B] button on the external
equipment.
Press [STOP C] on the unit to stop
recording.
Press
[STOP\EJECT CA] on the unit to stop
recording.
Note
• During recording, recording will be paused when a signal
other than PAL or SECAM is detected. (See “Video Colour
System” on page 37 for details.)
• The signal from the external device will be output automatically
when the TV is connected to AV1 and the external device is
connected to AV2 using a Scart cable with its power on.
(However, it will not be output when this unit’s power is turned off.)
If you want to monitor this unit’s signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG. G\H].
Information on DV Dubbing
This function helps you to dub the contents in the DVC (digital
video camcorder) to DVD or VCR easily. (See page 72 for
DVC to VCR Dubbing.)
You can control basic operations of the DVC from the remote
control of this unit if the DVC is in video mode.
1 Connect your DVC to the DV-IN jack on the front
panel using a DV cable. (Use the DV cable that
has 4-pin input jack and is compliance with the
IEEE 1394 standards.)
2 Press [INPUT SELECT] repeatedly to select the
external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
3 Press [DISPLAY] to display the DVC information
on the screen.
When the DVC is in video mode...
When the DVC is in camera mode...
The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the dubbing
information.
1DV icon
2 Indicator of active device
• With “Control” highlighted, press [ENTER\OK] to display
the available devices to control with the remote control
of this unit. Select the device you want to operate using
[K \ L], then press [ENTER\OK].
- Select “DVD” to control this unit with the remote control
of this unit.
- Select “DVC” to control your DVC with the remote
control of this unit.
3 Recording audio mode
• “DV Audio” can be changed. With “DV Audio” selected,
press [ENTER\OK] to display “DV Audio” menu. Select
the audio you want to output using [K \ L], then press
[ENTER\OK].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was added after
the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4 Command menu
• “Start Rec” or “Pause Rec” will appear.
5 External input channel
6 Product name of your DVC
• If the unit cannot recognise the input signal from the
DVC or if it is the unknown product, “No Device” or “****”
will appear instead.
When you want to record to a videotape:
7 For disc:
For videotape:
Guide to DV and On-Screen Display
The following instructions are described with the
operations using the remote control of this unit.
DV
AB-1234
0:12:34
1/ 1 1/ 1
D VD 2H 2:00
-
R W VR ORG
2
3
1
4
T C
Cont r ol D VD
D V A udio Stereo1
Sta r t Rec
DV
AB-1234
0:12:34
1/ 1 1/ 1
-
R W VR ORG
D VD 2H 2:00
7
5
6
T C
… 38 …


Need help? Post your question in this forum.

Forumrules
1

Forum

funai-wd6d-m101

Reset search

  • Can this machine be connected to a Mac computer presumably via the USB port Submitted on 27-4-2023 at 13:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai WD6D-M101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai WD6D-M101 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WD6D-M101

Funai WD6D-M101 User Manual - German - 84 pages

Funai WD6D-M101 User Manual - Dutch - 85 pages

Funai WD6D-M101 User Manual - Italian - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info