Manual Funai WD6D-M101 (page 34 of 84) (English)

503729

Zoom out

Zoom in

1/84

Note

• If you have not set the clock, the clock setting window will

appear instead of the Timer Programming list. Continue

from “A Clock Setting” on page 68 before programming the

timer.

•Press [K \ L] to move the cursor in “Timer Programming”

list.

• If a basic recording or One-touch Timer Recording is in

progress on one component (e.g. VCR) and the timer

recording set for the other component (e.g. DVD) is about to

begin, the unit automatically switches to the programmed

channel for timer recording 2 minutes before the

programmed starting time, and the recording in progress (for

VCR) will be cancelled UNLESS their recording channels

are the same. If their recording channels are the same, the

timer recording will start without cancelling the recording

currently in progress. In this case, the recording of the same

channel will be made on both DVD and VCR.

• Cancel the timer-standby mode by pressing [TIMER SET] to

use the component currently in timer-standby mode. When

finished operating, press [TIMER SET] to resume the timer-

standby mode.

• In the timer-standby mode, you can turn on the power and

use the component (VCR or DVD) which is not currently

timer-programmed.

The Video Programme System (VPS) or Programme Delivery

Control (PDC) assures that the TV programmes you have

programmed for timer recording are recorded exactly from

beginning to end, even if the actual broadcasting time differs

from the scheduled time due to a delayed start or extension of

the programme duration. Furthermore, if a programme is

interrupted, the recording will also be interrupted

automatically and resumed when the programme starts again.

If the VPS/PDC signal drops out because the broadcast signal

is weak, or if a broadcasting station does not transmit a

regular VPS/PDC signal, the timer recording is performed in

normal mode (without VPS/PDC) even if it was programmed

for VPS/PDC. If the starting time of the VPS/PDC timer

recording is between 0:00 and 3:59 on a given day, the VPS/

PDC function will operate from 20:00 on the previous day to

4:00 on the next day. If the starting time of the VPS/PDC timer

recording is between 4:00 and 23:59 on a given day, the VPS/

PDC function will operate from 0:00 on the given day to 4:00

on the next day. This means that if the relevant programme is

broadcasted within this period, it is recorded correctly. If the

timer is not programmed correctly, the incorrect timer setting

stays in effect unless you cancel it. To cancel an incorrect

timer setting, refer to “Checking, Cancelling or Correcting the

Timer Programming Information” on page 34.

Note

• This feature is only available for analogue channels.

1 Press [TIMER SET] to cancel the timer-standby

mode.

2 Press [TIMER PROG.].

“Timer Programming” list will appear.

3 A) To delete the timer programme:

1) Select the programme you want to delete using

[K \ L], then press [ENTER\OK].

2) Select “Delete” using [K \ L], then press

[ENTER\OK].

Confirmation window will appear.

3) Select “Yes” using [K \ L], then press [ENTER\OK].

B) To correct the timer programme:

1) Select the programme you want to correct using

[K \ L], then press [ENTER\OK].

2) Select “Programme Change” using [K \ L], then press

[ENTER\OK].

3) Correct the timer programme by using [K \ L \ 0 \ 1],

then press [ENTER\OK].

4 Press [TIMER PROG.] to exit.

5 Press [TIMER SET] to return to the timer-

standby mode.

To check the timer programming in progress

Press [TIMER PROG.].

Note

• If a timer recording is proceeding, that programme is

highlighted in red. In such a case, you cannot select any

other programmes.

• When you check the timer programming in progress by

pressing [TIMER PROG.] during operations of the

component (DVD or VCR) which is not currently used for the

timer recording, the programme will not be highlighted. In

this case, you cannot select other programmings.

On the front panel:

Press [STOP C].

On the remote control:

1Press [STOPC].

2 Select “Yes” using [K \ L], then press

[ENTER\OK].

The error number appears on “Timer Programming” list.

The error programme will be displayed in grey with an error

number.

VPS (Video Programme System) / PDC

(Programme Delivery Control)

Checking, Cancelling or Correcting the

Timer Programming Information

Stop the Timer Recording in Progress

If the Timer Programming did not

Complete Correctly

1/1

E40

17/05 7:00 9:00

1 TF1

17/0510:00

Date Start End CH

Timer Programming

STTL

VPS/PDC

FRI

New Programme

Can this machine be connected to a Mac computer presumably via the USB port Submitted on 27-4-2023 at 13:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Funai WD6D-M101 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WD6D-M101

Funai WD6D-M101 User Manual - German - 84 pages

Funai WD6D-M101 User Manual - Dutch - 85 pages

Funai WD6D-M101 User Manual - Italian - 80 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Funai WD6D-M101 Manual

Product: