503729
32
Zoom out
Zoom in
Previous page
1/84
Next page
32
EN
Basic Recording and One-touch Timer
Recording (OTR)
Follow the steps below to record a TV programme.
(See page 71 for VCR recording.)
1 Press [STANDBY-ON Q] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
Press [DVD].
2 Press [OPEN\CLOSE EJECT A] to open the
disc tray.
3 Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
4 Press [OPEN\CLOSE EJECT A] to close the
disc tray.
5 Select the recording speed using [REC SPEED].
(See page 28.)
6 Press [INPUT SELECT] to select DVB, analogue
or external input mode, then select the desired
channel to record using [PROG. G\H] or
[the Number buttons].
Press [REC] to start recording.
The “I” mark will be displayed on the TV screen briefly.
To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC] again to restart the recording.
This is a simple way to set the recording time in blocks of
30 minutes. Check that the disc you are recording onto
has enough space remaining for the time you set. (See
page 71 for VCR recording.)
Press [REC] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
When the unit reaches the specified time, it will be
turned off automatically.
To change the recording length during One-touch Timer
Recording, press [REC] repeatedly until the desired
length appears.
To cancel One-touch Timer Recording within the
specified time, press [STOP C].
8 Press [STOP C] to stop the recording.
This operation may take a few moments to complete.
Note
You can change the channel while in the REC pause mode.
Recording continues until the disc is full or you stop the
recording.
If the clock is not set, the date and time of title names will be
01/01/13 and 00:00.
You cannot change the recording speed in the REC or REC
pause mode.
Even if the broadcasting you are recording is in the SECAM
system, this unit automatically converts it to the PAL system
when recording.
Up to 99 titles can be recorded on the DVD-RW/-R discs.
You can play back a title on one component while making a
recording on the other component. To do so, simply select
the component (DVD or VCR) you want to use for the
playback by pressing [DVD] or [VCR] during DVD / VCR
recording. And then follow the normal playback procedure.
NTSC recording is prohibited in this unit.
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
The remaining recording time will be displayed on the front
panel display during One-touch Timer Recording.
Unlike the timer recording, you can perform the following
operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be
cancelled.)
-Use [REC] or [STOP C] on the remote control.
You cannot use the pause function during One-touch Timer
Recording.
The unit will be turned off automatically under the following
conditions.
- No space remains on the disc.
- If a power failure occurs.
If DVD One-touch Timer Recording is completed during
VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
When One-touch Timer Recording is finished and the power
is turned off, the unit will switch to the timer-standby mode
automatically if a timer recording has been programmed.
Press [TIMER SET] to cancel the timer-standby mode to
use the unit continuously.
DVB ANALOG
7 Basic Recording:
One-touch Timer Recording (OTR):
D VD-RDVD-RD VD-R
Disc tray guide
0:30
8:00 7:30
1:00
Normal
Recording
32


Need help? Post your question in this forum.

Forumrules
1

Forum

funai-wd6d-m101

Reset search

  • Can this machine be connected to a Mac computer presumably via the USB port Submitted on 27-4-2023 at 13:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai WD6D-M101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai WD6D-M101 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WD6D-M101

Funai WD6D-M101 User Manual - German - 84 pages

Funai WD6D-M101 User Manual - Dutch - 85 pages

Funai WD6D-M101 User Manual - Italian - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info