503771

Funai PB1-M200 Manual

54
Zoom out
Zoom in
Previous page
1/64
Next page
54 EN
Proxy Setting
1 Follow steps 1 to 4 in “Connection
Test” on page 51.
2 Use [K / L] to select “Custom”, then
press [OK].
3 U
se [K / L] to select “Proxy Setting”,
then press [OK] repeatedly to select
the desired setting.
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting
as instructed by your Internet service
provider to set the designated proxy
address and port, select “Use”.
If you select “Use”, follow the
instructions below to set the proxy
address and proxy port.
3-a) Use [K / L] to select “Proxy
Address”, then press [OK]. Proxy
address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
[K / L /0 / 1]
: Move the highlight.
[the Number
buttons]
: Enter number.
[OK] : Enter the highlighted
item.
[CLEAR] : Clear the entered
number or word.
3-b) After you enter proxy address
correctly, press [BLUE].
• Confirmation message will
appear. Select “Yes” to complete
the settings.
3-c) Use [K / L] to select “Proxy Port” ,
then press [OK]. Proxy port setting
screen will appear. Enter proxy port
number with number buttons.
3-d) After you enter proxy port correctly,
press [OK].
4 Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• The range of input numbers for the port
number is between 0 and 65535. (If you
enter a number larger than 65535, it
will be regarded as 65535.)
• For proxy port, certain ports might be
closed, blocked or unusable depending
on your network environment.
Connection Speed
You can set connection speed as your
preference. (The default setting is “Auto”.)
1 Follow steps 1 to 4 in “Connection
Test” on page 51.
2 Use [K / L] to select “Custom”, then
press [OK].
3 Use [K / L] to select “Connection
Speed”, then press [OK].
4 Use [K / L] to select the desired
setting, then press [OK].
“Auto”:
Set the appropriate connection speed
automatically, in accordance with your
network environment.
“10BASE Half”:
Set the connection speed to “10BASE
Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE
Half”.
“100BASE Full”:
Set the connection speed to “100BASE
Full”.
5 Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• Choose a connection speed in
accordance with your network
environment.
• The network connection may be
disabled depending on the device,
when the settings are changed.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai PB1-M200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai PB1-M200 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info