503771
53
Zoom out
Zoom in
Previous page
1/64
Next page
53EN
IP Address Setting / DNS Setting
1 Follow steps 1 to 4 in Connection
Test on page 51.
2 Use [K / L] to select Custom, then
press [OK].
3 Use [
K / L
] to select “IP Address
Setting”, then press [OK] repeatedly
to select the desired setting.
Auto(DHCP)” : If your router has DHCP
server function, select
Auto(DHCP)”.
“Manual” : If your router does not
have DHCP server
function, select “Manual”.
If you select Manual”, follow the
instructions below to set the IP address
and DNS.
3-a) Use [K / L] to select “IP Address,
“Subnet Mask or “Default Gateway”,
then press [OK]. IP address setting
screen will appear. Enter IP address,
subnet mask or default gateway
with cursor buttons and number
buttons.
Enter the IP address number after
checking the specifications of
your router.
If the IP address is unknown,
check the IP address of other
devices. (e.g. PC connected via
LAN cable) and assign a different
number from those of other
devices.
3-b) After you enter all correctly, press
[OK].
Confirmation message will
appear. Select “Yes” to complete
the settings.
3-c) Use [K / L] to select “Primary DNS”
or “Secondary DNS”, then press
[OK]. DNS setting screen will
appear. Enter primary DNS or
secondary DNS with cursor buttons
and number buttons.
Enter the DNS addresses provided
by your Internet provider.
If the DNS address is unknown,
check the DNS address of other
devices (e.g. PC connected via
LAN cable) and assign the same
DNS address.
3-d) After you enter all correctly, press
[OK].
Confirmation message will
appear. Select “Yes” to complete
the settings.
4 Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
The range of input numbers is between
0 and 255.
If you enter a number larger than 255,
the number will automatically be 255.
The manually entered addresses will be
saved even if you change the setting to
Auto(DHCP)”.
When you enter a wrong number, press
[CLEAR] to cancel. (The number will be
back to “0”.)
If you want to enter 1 or 2 digit number
in one cell, press [1] to move on to the
next cell.
If the entered IP address or the default
gateway or primary DNS address are
the same as the default setting, IP
address setting will be set to
Auto(DHCP)”. (The manually entered
number will be saved.)
When IP address setting is set to
“Manual”, the setting of DNS setting will
automatically be “Manual” and when IP
address setting is set to Auto(DHCP)”,
you can set either Auto(DHCP)” or
“Manual” for DNS setting.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai PB1-M200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai PB1-M200 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info