503545
6
Zoom out
Zoom in
Previous page
1/20
Next page
EN
7
PC Connection
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are completed.
Initial Setup
This section will guide you through the unit's initial setting
which includes selecting a language for your on-screen menu
and auto scan, which automatically scans and memorises
viewable channels.
1 After making all the necessary connections, press Q to
turn the unit.
2 Use K / L repeatedly to select the menu language, the
country and the region, then press OK.
3 When below display appear, then press OK to start
scanning.
4 Use 0 / 1 to select the location, then press OK.
The following signals can be displayed.
Other formats or non-standard signals will not be
displayed correctly.
Please use the VGA cable that has a ferrite core.
PC-IN
AUDIO
LINE OUT
PC-IN
AUDIO
Your TV
Your device
Mini-plug audio cable
VGA cable
with ferrite
core
Format Resolution Refresh rate
VGA 640 x 480
60 Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA
1,280 x 768
1,360 x 768
AC outlet
Your TV
• If you select the country except [Spain] or [Portugal], you can skip
region setting.
Scan confirmation menu will appear.
If you press MENU during DTV channel scanning, this operation
will be stopped and ATV channel scanning will start automatically.
If you press MENU during ATV channel scanning, this operation
will be stopped and skip to step 4.
When no channel is registered, retry confirmation menu will
appear.
Select [at Home], this unit is set to maximize the energy efficiency
for home setting and it can be adjusted through a choice of picture
and sound quality according to your preference.
Select [Retailstore], this unit will be set up with predefined setting
for retail displays. If you select [Retailstore], the settings of picture
and sound quality you adjusted will not be memorised after the
unit goes to the standby mode.
• When “Initial Setup” is completed, you cannot change the location
setting unless you restore this unit to “Factory Reset” (p. 18) and
that restarts all over again such as channel scanning.
Initial Setup
Initial Setup
Please select your language.
Български
Česky
Dansk
Deutsch
Eesti
Ελληνικά
English
Select
OK
Skip
Initial Setup
Initial Setup
Start
Back Skip
First, please connect anntena.
Start channel scan now?
Scan
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LED22T800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LED22T800 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai LED22T800

Funai LED22T800 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info