503756
9
Zoom out
Zoom in
Previous page
1/32
Next page
9 EN
Decoder Allocation
Some TV channels transmit encoded TV signals which can only be
viewed with a purchased or hired decoder. You can connect such a
decoder to this unit. The following function will automatically
activate the connected decoder for the desired TV channel.
1) Press STANDBY-ON to turn on the TV.
2) Press / (prog.) or the Number buttons to select the TV
channel which you would like to allocate the decoder to.
3) Press SETUP so that the menu display appears on the TV screen.
4) Press Cursor K / L to point to “INITIAL”, then press
ENTER
.
5) Press Cursor K / L to point to “CH TUNING”, then press
ENTER
.
6) Press Cursor K / L to point to “MANUAL”, then press
ENTER.
7) Press Cursor K / L to point to “DECODER”.
8) Press ENTER to select “ON” (decoder switched on).
To switch off the decoder, press
ENTER to select “OFF”.
9) Press SETUP to exit.
The decoder has now been allocated to this TV channel.
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can
be set to be skipped when you access channels by pressing
/ (prog.).
1)
Follow the steps 1) to 4) in the “Automatic Channel Presetting”.
2) Press Cursor K / L to point to “MANUAL”, then press
ENTER
.
3) Press Cursor K / L to point to “POSITION”, then press
ENTER
.
4) Press the Number buttons or Cursor K / L to select relevant
position number, then press
ENTER
.
5) Press Cursor K / L to point to “SKIP”, then press ENTER to
select “ON”.
To memorise the channel again, press
ENTER
. “ON” will
change to “OFF”.
6) Press SETUP to exit.
Note: To confirm that a channel has been deleted, press
/ (prog.).
Channel Reprogramming
You can move a channel allocated to a position to another while
keeping the total number of the positions the same. When you move
a channel, all the other channels in the positions will be affected.
1) Follow the steps 1) to 4) in theAutomatic Channel Presetting”.
2) Press Cursor K / L repeatedly to point to “MOVE”, then press
ENTER
.
3) Press Cursor K / L repeatedly to select the position number you
want to change the channel, then press
ENTER
.
You cannot select a position number where “
---” appears next
to the number. This is because “SKIP” is set to “ON” for this
position number.
4) Press Cursor K / L repeatedly to move the selected channel to
the programme number you want to assign, then press
ENTER
.
5) Press SETUP to exit.
Stereo Sound System
This TV will receive stereo and bilingual broadcasts.
Selecting the Sound Mode
You can select each mode by pressing
SOUND SELECT on the
remote control. Each mode is indicated on the TV screen as following.
During reception of stereo broadcasts
During reception of bilingual broadcasts
SETUP
BACK LIGHT [BRIGHT]
INITIAL
INITIAL
CH TUNING
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P55
055
[ON]
[OFF]
SETUP
BACK LIGHT [BRIGHT]
INITIAL
INITIAL
CH TUNING
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P55
055
[OFF]
[ON]
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P55
055
[OFF]
[ON]
Mode Audio output
Display on
the TV screen
Stereo Stereo STEREO
L L audio from the both speakers LEFT
R R audio from the both speakers RIGHT
Normal Monaural - None -
Mode Audio output
Display on
the TV screen
Main Main audio from the both speakers MAIN
Sub Sub audio from the both speakers SUB
Main / Sub
Main audio from the left speaker
Sub audio from the right speaker
MAIN + SUB
SETUP
BACK LIGHT [BRIGHT]
INITIAL
INITIAL
CH TUNING
LANGUAGE
MOVE
P01: 02
P02: 03
P03: [04]
P04: 05
P05: 06
CH TUNING
AUTO
MANUAL
MOVE
P06: 07
P07: 08
P08: 09
P09: 10
P10: 11
MOVE
P01: 02
P02: 03
P03: 05
P04: 06
P05: 07
P06: 08
P07: 09
P08: 10
P09: 11
P10: [04]
MOVE
P01: 02
P02: 03
P03: 05
P04: 06
P05: 07
P06: 08
P07: 09
P08: 10
P09: 11
P10: 04
Position
Number
Channel
Number
L4670EA(EN).fm Page 9 Tuesday, May 15, 2007 5:36 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LDD-B2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LDD-B2006 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info