503756
6
Zoom out
Zoom in
Previous page
1/32
Next page
6 EN
Setting up
Unpacking
The stand of this unit is folded when you purchased. Place this
unit face-down on a flat surface covered with the soft cloth.
Bend the stand slowly to forward until it clicks.
If you want to fold the stand again, insert a thin rod into the
hole in the right side of the stand as illustrated, bend the stand
backward while you keep pushing the hole.
Before Connecting
Please refer to the instruction books of this unit, Stereo
System or other devices as necessary to make the best
connections.
The following guideline is an option for the best sound quality
available on this unit.
Digital audio connections provide the clearest sound.
Connect the unit’s DIGITAL AUDIO OUT (COAXIAL)
to your amplifier or receiver (for DVD features only).
WARNING!
Never make or change connections with the power
switched on.
Note on a scart cable (Output):
When you use the scart cable to connect this unit to an
additional device, both video and audio signals of TV can
be delivered. (The video and audio signals of DVD and
external devices cannot be delivered.)
Connecting
Connecting the Cable
1) Insert the RF cable plug into the Aerial input jack at
the back of this unit.
2) Plug this unit into an AC outlet.
3) The ON/OFF (standby) indicator on the front panel
lights on, then press STANDBY-ON on the control panel or
the remote control to turn the unit on.
PROG. (+/
-
or / ) can also be used to turn the unit
on.
Connecting Additional Devices
You can connect an additional device such as decoder, satellite
receiver, camcorder, etc. to the AV-IN1 scart jack.
The scart jack to be connected is usually marked “AV” or
“TV” on the decoder or satellite receiver.
You can also use the AUDIO/VIDEO input jacks.
Note: To receive the signals from an external source, select
an input mode “AV1” or “AV2” on this unit by
pressing SELECT on the control panel or
INPUT SELECT on the remote control.
If you are using the AV-IN1 scart jack, select “AV1”.
If you are using the AUDIO/VIDEO input jacks,
select “AV2”.
Do not bend from this side.
VHF/UHF
MIXER
RF cable
(not supplied)
UHF
VHF
Scart cable (not supplied)
L4670EA(EN).fm Page 6 Tuesday, May 15, 2007 5:36 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LDD-B2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LDD-B2006 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info