510528
57
Zoom out
Zoom in
Previous page
1/62
Next page
E-57
EnglishDeutschEspañolFrançaisItalianoPortuguês
඾ġུġࢊ
Póññêèé
Ё᭛
4
Loosen two screws on the lamp unit to pull out it.
The lamp unit is so constructed that the screws cannot be detached from it.
5
Reverse the disassembling procedure above to set
the lamp unit and lamp unit cover in position.
Check that the lamp unit is installed securely.
6
After inserting the power plug into the receptacle,
press "ENTER" button, and then, press "POWER"
button five times.
At this time, all monitor indicator lamps blink for a few seconds.
The lamp timer is initialized to "0".
* When replacing the lamp unit, do not touch the glass inside the projector.
Dust and fingerprints sticking to the glass may deteriorate the luminous
intensity of the light source lamp and shorten its life.
Replace lamp unit with a new one.
Loosen two screws.
Note
For replacement, be sure to use a lamp unit specified by the manufacturer only. Otherwise, failure of the lamp to light up, and explosion or damage
of the lamp will result.
Turn on the light source lamp, and press
\ to select the lamp timer. Check that "0" is set for the lamp timer. Otherwise, initialize the timer again.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu Siemens LPF-D711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu Siemens LPF-D711 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info