510528
54
Zoom out
Zoom in
Previous page
1/62
Next page
E-54
CLEANING AND MAINTENANCE
If the ventilation holes become blocked, the temperature inside the projector rises and the lamp will fail to light. Clean the ventilation
holes about once every 6 months. Cleaning will be required more frequently if used in a particularly dusty environment.
When the air filter of the ventilation hole becomes hard to clean, it is ready to be changed. Purchase a new air filter (with the filter
holder).
Do not use the projector with the filter holder detached, as dust and debris may get into the projector, causing them to appear on the
projected screen.
Warning
Do not remove any screws other than those specified (" χ " mark).
The high voltage and high temperature inside the projector may lead to electric shock or burns if touched.
PRECAUTIONS ON AIR FILTERS AND LAMP PROTECTION FILTER
CLEANING THE AIR FILTERS AND LAMP PROTECTION FILTER
1
Unplug the power cord from the
receptacle.
2
Turn the projector upside down.
Pay attention to avoid scratches over the cover by laying a
thick towel and other soft cloth under the projector.
3
Remove the two screws marked with
" χ ", and take out the lamp protection
filter.
4
Clean the air filters and lamp protection
filter.
Vacuum-clean the filters.
To do so, be sure to attach a brush to the hose of the vacuum
cleaner.
5
Reverse the disassembling procedure
above to set the lamp protection filter in
position.
Lamp protection filter
Air filter
Note
Be sure to use the vacuum cleaner with a brush attached to its hose.
Application of strong suction power may damage to the filter.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu Siemens LPF-D711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu Siemens LPF-D711 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info