20103
14
Zoom out
Zoom in
Previous page
1/18
Next page
PRINT HEAD ALIGNMENT
This function is typically used by maintenance personnel to adjust vertical
alignment of bidrectionally printed characters. You may also use this procedure
as follows:
1. Hold the FF and LF buttons down while turning power on.
The display will show “VER.ALIGNMENT:n” and the printer, in bidirectional
mode, will print a series of vertical bars.
The vertical bars will line up, when printing in this mode.
“n” is set at the factory between –8 and +7 for best alignment of these bars.
2 If the alignment is correct, press the RESET button.
If the alignment is not correct:
Press the FF button to decrease the value of “n” and move the vertical bars
towards the right side.
Press the LF button to increase the value of “n” and move the vertical bars
towards the left side.
3 Press the RESET button when the best alignment is obtained. The display
shows “SAVING NOW!!”, and then “ON-LINE:READY”.
ERROR MESSAGES
The printer’s error messages and the action needed to correct the error is shown
in the following charts:
Table 3-4 Operational error messages
Error message Cause Recovery
COVER OPEN ERROR
The front cover is not
closed
*Close the front cover
PAPER OUT ERROR
Printer has detected
paper out state
*Load new paper
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu DL2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu DL2600 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu DL2600

Fujitsu DL2600 User Manual - English - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info