20103
12
Zoom out
Zoom in
Previous page
1/18
Next page
SAVE FUNCTION
When the Display shows “FUNCTN :SAVE” and either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the display will briefly show “SAVING
NOW!!” and the currently selected options will be saved in non-volatile memory. If
you do not perform this operation, your selections will be lost when power is
turned off. Saved selections show an asterisk (*) in the last position of the
display.
LIST FUNCTION
When the display shows “FUNCTN :LIST” and either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the display will briefly show all selected
options.
This function is provided for checking the parameters currently stored in the RAM
by the STYLE and INTRFCE setting functions. It does not display the contents of
non-volatile memory. Therefore, to check whether the parameters are correctly
stored in non-volatile memory, execute this function after turning power off and on
or after performing the reset operation to instruct the printer to reread the contents
of non-volatile memory.
If, during the LIST process, either the ITEM/(LF) or SELECT/(RESET) button is
pressed, the listing will stop and the display will show the last item and option
shown before the button was pressed.
If either the ITEM/(LF) or SELECT/(RESET) button is pressed again, the selected
options continue to be listed.
Press the FUNCTION/(FF) button to return to the FUNCTN level.
SELF TEST FUNCTION
When the display shows “FUNCTN :SELF TST” and either the ITEM/(LF) or
SELECT/(RESET) button is pressed, the display changes to “SELF TEST PRINT”
and the printer will print a SELF-TEST that shows:
- All currently selected options
- Firmware revision level
- Self-test printing pattern
If, during the SELF TST printing operation, either the ITEM/(LF) or
SELECT/(RESET) button is pressed when “===PAUSE=== is displayed, the
SELF TST printing will continue.
Press the FUNCTION/(FF) button to return to the FUNCTN level.
NOTE:
You can also start the self-test by turning the POWER switch on while holding
down the FUNCTION/(FF) button.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu DL2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu DL2600 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu DL2600

Fujitsu DL2600 User Manual - English - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info