587425
7
Zoom out
Zoom in
Previous page
1/15
Next page
6
TIMER
DAY
WEEKLY
AUTO
ON
OFF
TIMER
MODE
SET
ZONE
START/STOP
CLOCK ADJUST
SET TIME TEMP./DAY FAN
CONTROL
MASTER
CONTROL
21
AUTO
DEFROST TEST
DAY OFF
ENERGY SAVE
6
7
CLOCK
AUTO
TIMER
MODE
SET TIME TEMP./DAY FAN
CONTROL
21
AUTO
DEFROST TEST
NOTES:
(1) If no time values are flashing, the clock display will automatically reappear after 15 seconds if no buttons are pressed.
(2) A flashing time value indicates that the system is in time-setting mode. To return to the clock display you must hold
down the SET button for 3 seconds.
(3) You do not need to set values for both WEEKLY 1 and WEEKLY 2. If you wish, you can set values only for WEEKLY 1
or only for WEEKLY 2.
(4) The allowable range for the days time settings is shown below.
(5) If you set the OFF time to occur on the day following the ON time, the NEXT DAY caption appears on the display.
6Press the SET TIME button to set the days first OFF
time.
The earliest OFF time you can set is 5 minutes after the ON time. The
latest OFF time is 23:55 on the subsequent day.
7Press the SET button.
This registers the first OFF time for the day, completing the WEEKLY 1
settings for that day.
The display switches to WEEKLY 2, and the days second ON time be-
gins flashing.
8Repeat the operations described in Steps 4 to 7 to set
the second ON and OFF times for the day (the WEEKLY
2 times).
When you press the SET button after setting the WEEKLY 2 OFF time,
the system registers the WEEKLY 2 settings for the day and returns you
to the WEEKLY 1 ON time setup process. (The first ON setting reap-
pears and begins flashing.)
You can review your settings by pressing the SET button. Each press
moves you to the next setting, as follows.
WEEKLY 1 WEEKLY 1 WEEKLY 2 WEEKLY 2
ON OFF ON OFF
9Press the SET TEMP./DAY button to select another day
for setup. The repeat steps 4 to 8 above to set the ON
and OFF times for that day.
10
When you have finished setting all of the times, hold
down the SET button for 3 seconds.
The WEEKLY display flashes for 3 seconds while the new WEEKLY TIMER
settings are registered, and then the clock display reappears.
cccc
Next days WEEKLY
settings
Cannot set 5 min. Available range Cannot set
5 min.
ON OFF ON OFF
Previous days WEEKLY
settings
0:00 0:00
TIMER
NEXT DAY
DAY
WEEKLY
AUTO
ON
OFF
21
AUTO
DEFROST TEST
If the timer is not set, press the SET but-
ton with the time display blank ,
and perform next operation.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu AOT90EP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu AOT90EP in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info