288592
62
Zoom out
Zoom in
Previous page
1/67
Next page
123122
Problem Cause RemedyProblem Cause Remedy
Troubleshooting
Can’t format the
SmartMedia.
• The SmartMedia is write-protected. Remove the write-protection.
(Peel off the write-protect sticker.)
The ERASE ALL function
does not erase all the
frames.
• The frame is protected. • Remove the frame protection.
Nothing happens when I
use the camera switches
and dial.
• Camera malfunction.
The Mode switch and Mode dial has been
moved to another setting.
• The battery is exhausted.
Remove the battery, re-insert them and
try again.
• Set the Mode switch and Mode dial to the
correct setting.
• Load a new fully charged battery.
No image appears when I
press the “DISP” button.
The Mode switch and Mode dial has been
moved to another setting.
• Set the Mode switch and Mode dial to the
correct setting.
The camera does not
emit any sound.
• The camera volume is set too low.
The microphone was blocked during
shooting/recording.
The speaker was blocked during
playback.
• The A/V cable is connected.
• Adjust the volume.
Take care not to block the microphone
during shooting/recording.
• Take care not to block the speaker during
playback.
• Disconnect the A/V cable.
There is no picture on
the TV.
The camera and TV are connected
incorrectly.
• The TV input is set to “TV”.
• Connect the TV and camera correctly.
• Set the TV input to “Video”.
PC connection failed.
The camera and cradle are not connected
correctly.
The USB cable is not connected to the
cradle correctly.
• The camera and USB cable are not set up
correctly.
• The PC is not switched on.
• Connect the camera and cradle correctly.
Ensure that the USB cable is properly
connected to the cradle.
Set up the camera and USB cable
correctly.
• Switch the PC on.
The lens extends during
card reader connection.
The camera and cradle are not connected
correctly.
• The PC is not switched on.
• Connect the camera and cradle correctly.
• Switch the PC on.
I tried to charge the
battery but the self-timer
lamp does not light.
• There is no battery in the camera.
The camera and cradle are not connected
correctly.
The cradle and AC power adapter are not
connected correctly.
• Load the battery.
• Connect the camera and cradle correctly.
• Connect the cradle and AC power adapter
correctly.
The self-timer lamp blinks
during battery charging.
• The battery is old. • Install a new battery.
The camera no longer
works correctly.
The camera has suffered an unforeseen
problem.
Remove the battery briefly and then
reload the battery and try again.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix4800 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info