Manual Fujifilm Finepix S3 Pro (page 33 of 73) (English)

510440

Zoom out

Zoom in

1/73

64 65

Advanced Photography

Use auto exposure bracketing when you want to take the same shot with different exposure

settings. Using the correct exposure setting displayed by the camera (the value set in “M” exposure

mode) as a reference, the camera can automatically offset the exposure by a set value (up to ±2 EV

steps without exposure compensation) in either direction.

Hold down the “

c” button 1 as you turn Main-

command dial 2 to display the “Q” icon on the

top display panel.

h The “

d ” icon continues to flash while auto

exposure bracketing is being used to indicate that

auto exposure bracketing photography is in

progress.

Hold down the “c” button 1 as you turn Sub-

command dial 2 to set the number of shots (up to

3) and the exposure offset (up to ±2 EV steps in

1/2 EV step increments).

■ List of exposure offsets and numbers of shots

Number of shots and

compensated EV value

Bracketing bar graph Bracketing order

0, –0.5, +0.5

0, –1.0, +1.0

0, –1.5, +1.5

0, –2.0, +2.0

0, +0.5

0, +1.0

0, +1.5

0, +2.0

0, –0.5

0, –1.0

0, –1.5

0, –2.0

01 02

●

Check the number of available shots before setting the

number of shot.

Compose picture, focus and shoot. A bracketing bar graph in the top display panel shows the

photography status each time a shot is taken.

h When three shots are to be taken, “ ” is shown before shooting begins, “ ”

appears after the first shot, “ ” appears after the second shot, and the bar graph

disappears when shooting is completed.

h If you hold the shutter button down when the “

.” (Continuous shooting) release mode is

selected, shooting automatically stops when the specified number of shots has been taken.

Note that shots are taken one frame at a time when the built-in flash is used.

h If the exposure compensation function (➡P.63) or flash exposure compensation (➡P.73) is

also set, Auto Exposure Bracketing will be combined with the exposure compensation values.

It is useful to perform Auto Exposure Bracketing with a compensated value of over +2 EV or

under –2 EV.

h To cancel the Auto Exposure Bracketing, rotate the Main-command dial while pressing the

“c” button so “Q” disappears from the top display panel or perform Two-Button Reset

(➡P.109). The number of shots and compensated EV values previously selected will remain

when they are cancelled with the Main-command dial, and they automatically reset to

“” when the Two-Button Reset is performed.

CSM 1: Bracketing order can be set to change from negative EV value to positive EV value

(➡P.111).

●

The Auto Exposure Bracketing settings are canceled when the live image is displayed. Wait until live image display is

finished before specifying the Auto Exposure Bracketing settings.

c AUTO EXPOSURE BRACKETING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm Finepix S3 Pro Manual

Product: