288584

Fujifilm finepix s 2 pro Manual

51
Zoom out
Zoom in
Previous page
1/65
Next page
101
Connection
6
100
CONNECTING TO A COMPUTER VIA IEEE 1394
IEEE
1394 socket
Camera
1
1Load the media containing your shots into the
camera.
2Switch the camera on.
3Select “1394 DOWNLOADING” as the “PC
MODE” setting in SET–UP (➡P.89).
4Set the power switch to “OFF” to switch the
camera off.
●
!
Refer to the operating system compatibility charts on
P.100 and check that your operating system supports the
IEEE1394 interface.
●
!
Use of the AC power adapter (sold separately) is
recommended when connecting the camera to a
computer.
●
!
If a SmartMedia and Microdrive are both loaded into the
camera at the same time, the media selected in the
“MEDIA” setting in SET–UP is used (➡“Setup”, P.89).
2
1Switch your PC on.
2Connect the camera to the computer using
the bundled IEEE1394 cable.
3Switch the camera on.
IEEE
1394 socket
IEEE
1394 socket
PC
01
02
Always use the prescribed procedure when
disconnecting or switching off the camera
(➡P.103).
●
!
In Windows XP and Mac OS X, automatic startup must be set up the first time you connect.
●
!
The first time you connect, the media may take a few moments to mount.
●
!
Take care to ensure that the cable is connected the right way round and that the plugs are firmly inserted all
the way into the sockets.
Camera Operations
PC Operations
h The Access lamp blinks when the camera
and computer are exchanging data.
h “1394 DOWNLOADING” is displayed on
rear display panel.
h The Auto Power Off function is disabled
while the camera is connected to a
computer.
●
!
When replacing the media, always switch the camera
and computer off first using the procedure described
on P.103.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.103 for information
on the disconnection procedure.
h If FinePixViewer is installed, it starts up
automatically.
h A removable disk icon appears and you
can use your PC to transfer files to and
from the camera.
✽ Screen for
Windows 98 SE
If the above operations do not occur, you do
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.
Windows Macintosh
CONNECTING TO A COMPUTER
Install the software before connecting the camera to a computer.
The available functions differ depending on the camera’s PC mode settings, as shown below.
Bundled “software for FinePix”
CD-ROM
Optional “hyper-Utility
software”
FinePix S2 Pro
Computer
ＰＣＰＣ
ＭＯＤＥＭＯＤＥ ＵＳＢＵＳＢ  ＤＯＷＮＬＯＡＤＩＮＧ ＤＯＷＮＬＯＡＤＩＮＧ
ＰＣＰＣ
ＭＯＤＥＭＯＤＥ １３９４１３９４ ＤＯＷＮＬＯＡＤＩＮＧＤＯＷＮＬＯＡＤＩＮＧ
ＰＣＰＣ
ＭＯＤＥＭＯＤＥ １３９４ ＳＨＯＯＴＩＮＧ１３９４ ＳＨＯＯＴＩＮＧ
xAllows the camera to be
controlled and shots to be
taken from a computer.
xImages photographed with
the camera can be
automatically saved on the
computer.
Special USB cable
USB driver Shooting driver
IEEE 1394 cable
FinePixViewer
Shooting Software
xAllows photographed images to be saved on a computer
xCCD-RAW files can be played back and converted to other
formats.
xVoice memos can be played back.
h Refer to the User’s Guide for the optional Hyper-Utility Software HS-S2 for more information
on the photography modes.
h This description covers the downloading modes.
Connecting to a Computer
To connect the camera to a computer via a USB port, the computer must be equipped with a
USB port as a standard feature. (Operation is not guaranteed for USB ports added later.) To
connect via an IEEE1394 port, check that the interface is OHCI compliant and then refer to the
table below to check whether it is supported by your operating system.
■
Operating System Compatibility Chart (Windows) u: Can be connected ✕: Cannot be connected
OS
Connection type
Windows 98
✕
Windows 98 SE
(Second Edition)
u
✽2
Windows Me
(Millennium Edition)
u
Windows 2000
u
Windows XP
u
IEEE1394
uuuuu
USB
✽1
✽1 Can be used by installing the driver from the bundled CD-ROM.
✽2 Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be
capable of connecting to the Internet).
■
Operating System Compatibility Chart (Macintosh) u: Can be connected ✕: Cannot be connected
✽1 Can be used by installing the driver from the bundled CD-ROM.
✽2 Cannot be used even when installed as a standard feature, but can be used by downloading and installing the free
update to Mac OS 9.1. Contact Apple Computers (http://www.apple.com) for information on software updates.
OS
Connection type
Mac OS 8.6
✕
Mac OS 9.0.4
✕
✽2
Mac OS 9.1
u
Mac OS 9.2.1
u
Mac OS X
u
IEEE1394
uuuuu
USB
✽1
ＦＲＡＭＥ ＮＯ．ＦＲＡＭＥ ＮＯ．
ＯＦＦＯＦＦ
ＳＥＴ−ＵＰＳＥＴ−ＵＰ
ＲＥＳＥＴ ＡＬＬＲＥＳＥＴ ＡＬＬ
ＢＥＥＰ♪ＢＥＥＰ♪
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＯＫＯＫ
ＳＥＴＳＥＴ
ＬＯＷＬＯＷ
ＰＣ ＭＯＤＥＰＣ ＭＯＤＥ
１３９４ １３９４ ＤＯＷＮＬＯＡＤＩＮＧＤＯＷＮＬＯＡＤＩＮＧ
ＬＡＮＧＵＡＧＥＬＡＮＧＵＡＧＥ
ＥＮＧＬＩＳＨＥＮＧＬＩＳＨ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
0201
03
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix s 2 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix s 2 pro in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info