288584

Fujifilm finepix s 2 pro Manual

47
Zoom out
Zoom in
Previous page
1/65
Next page
93
Settings
5
92
VOICE MEMO
If you set the Voice Memo option to “ON”, the
“H” icon appears on the rear display panel.
Immediately after you take the shot, you can add
a voice memo (comment) up to 30 seconds long
to the image.
h Recording format: WAVE (➡P.122)
PCM recording format
h Audio file size: Approx. 240 KB (for a 30 seconds
recording)
●
!
The recording time may be shorter, depending on the
amount of space available on the media.
Set the release mode to “e” (Single-frame) and
take the picture.
After you take the picture, “®” appears
on the screen.
After 30 seconds of recording, “∑” appears
on the screen.
To end recording: Press the “MENU/OK” button.
To record the comment again: Press the “BACK”
button.
Recorded voice memos cannot be
played back on the camera. To play
back a voice memo, use a computer with
the bundled FinePixViewer application
installed.
ＲＥＣ ＳＴＡＮＤＢＹＲＥＣ ＳＴＡＮＤＢＹ
３０ｓ３０ｓ
ＣＡＭＣＥＬＣＡＭＣＥＬ
ＶＯＩＣＥ ＭＥＭＯＶＯＩＣＥ ＭＥＭＯ
ＳＴＡＲＴＳＴＡＲＴ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
1
2
Press the “MENU/OK” button to begin recording.
The remaining time and an elapsed time progress
bar are shown on the LCD monitor during audio
recording.
3
Recording procedure
●
!
Voice memos cannot be recorded in the “r” (Continuous
shooting) release mode.
●
!
If you do not want to record a caption, press the “BACK”
button. Note that the image is still recorded.
●
!
The LCD monitor switches off again when recording ends.
When recording the voice memo, speak into the
microphone (➡P.10) on the left of the 4-direction
button. For best results, position the microphone
about 20 cm away from your mouth during recording.
ＲＥＣＯＲＤＩＮＧ・・・ＲＥＣＯＲＤＩＮＧ・・・
ＲＥＣＲＥＣ
ＲＥＳＴＡＲＴＲＥＳＴＡＲＴ
２０ｓ２０ｓ
ＶＯＩＣＥ ＭＥＭＯＶＯＩＣＥ ＭＥＭＯ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
Elapsed time
progress bar
Remaining
time
ＦＩＮＩＳＨＦＩＮＩＳＨ
ＲＥＳＴＡＲＴＲＥＳＴＡＲＴ
ＶＯＩＣＥ ＭＥＭＯＶＯＩＣＥ ＭＥＭＯ
ＲＥＣＲＥＣ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
●
!
The recording time may be shorter, depending on the
amount of space available on the media.
●
!
To end recording mid-way, press the “MENU/OK” button.
SET–UP
5
ＯＫＯＫ ＣＡＮＣＥＬＣＡＮＣＥＬ
ＣＯＭＰＬＥＴＥＤＣＯＭＰＬＥＴＥＤ
ＯＫＯＫ
ＢＡＣＫＢＡＣＫ
If the exposure is measured correctly, “ø”
appears on the LCD monitor.
Press the “MENU/OK” button to confirm the
setting.
●
!
After you take a photograph, you should check the color
tones (white balance) in the image.
i Select “PREVIEW” as the photographed image display
option (➡P.90) in the SET–UP screen.
i Press the “
d” button (➡P.34).
When you have finished setting the white balance, select
the focus mode you want to use.
■ When the exposure is not measured correctly
Remedy
The subject is too bright. Use a negative (–) exposure compensation value
and set the white balance again.
The subject is too dark. Use a positive (+) exposure compensation value and
set the white balance again.
Because the exposure is outside the range of valid custom white balance
settings, the maximum (or minimum) value has been set.
h Available custom WB settings: Color temperatures of approx. 2800 K to 9500 K
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix s 2 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix s 2 pro in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info