101549
56
Zoom out
Zoom in
Previous page
1/65
Next page
111
Viewing Images
6
USB
CHECKING USB
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Card that was formatted on the camera.
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle.
3
01
02
2
1Connect the cradle to the printer using the USB
cable.
2Set the camera into the cradle.
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
5
1Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2Press the “MENU/OK” button.
SET
OKOK
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
01 02
4
” appears and then the menu
screen is displayed.
!
If the menu screen does not appear, check whether the “USB
MODE” setting is
ˆ”.
!
Depending on the printer, some functions are disabled.
110
Always press the “MENU/OK” button to complete
the settings.
!
Press the “DISP (BACK)” button to return to step 5.
6.4.2
Specifying images for printing without using DPOF (single-frame printing)
6.4 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER FOR
PRINTING IMAGES
(
PictBridge FUNCTION
)
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
To end printing, press the “DISP (BACK)” button.
!
Press the “DISP(BACK)” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop mid way through. When
printing stops mid-way, briefly turn the camera off and then
on again.
5
1Press “a” or “b” to select “uPRINT DPOF”.
2Press the “MENU/OK” button.
!
When “”
appears, the DPOF settings are
not specified.
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F710 beforehand (P.76).
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
SET
OKOK
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
01 02
!
Do not connect to a PC when the “USB MODE” setting is set
to “
ˆ”. Refer to P.121 if you connect to PC by mistake.
1
1Slide the Power switch to the side to turn the
camera on.
2Set the “USB MODE” setting in the “SET-UP”
menu to “ˆ” (P.85).
3Slide the Power switch to the side to turn the
camera off.
SET−UP
USB
MODE
CCD−RAW
OFF
FRAMENO.
言語言語
/LANG.
ENGLIS
CONT.
SET CANCE
OKOK
BACK
01 03
02
6
OKOK
BACK
YES
CANCEL
TOTAL/   1SHEETS
PRINT DPOF OK?
PRINT DPOF
7
BACK
CANCEL
   1/    1SHEETS
PRINTING
PRINT DPOF
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F710 in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info