101549
55
Zoom out
Zoom in
Previous page
1/65
Next page
109
Viewing Images
6
If a printer that supports PictBridge is available, images can be printed by connecting the camera
directly to the PictBridge-compatible printer without using a computer.
!
If the PictBridge function is used to print images shot using WIDE, the left and right edges of the images may be cropped.
The print size is specified on the printer. Refer to the instruction manual for the printer.
!
In PictBridge function, images photographed on other than a camera may not be printed.
4
” appears and then the menu
screen is displayed.
!
If the menu screen does not appear, check whether the “USB
MODE” setting is
ˆ”.
!
Depending on the printer, some functions are disabled.
6.4
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
FOR PRINTING IMAGES
(
PictBridge FUNCTION
)
Continued
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Card that was formatted on the camera.
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle.
3
01
02
2
1Connect the cradle to the printer using the USB
cable.
2Set the camera into the cradle.
USB
CHECKING USB
6.4.1
Specifying images for printing on the camera
!
Do not connect to a PC when the “USB MODE” setting is set
to “
ˆ”. Refer to P.121 if you connect to PC by mistake.
1
1Slide the Power switch to the side to turn the
camera on.
2Set the “USB MODE” setting in the “SET-UP”
menu to “ˆ” (P.85).
3Slide the Power switch to the side to turn the
camera off.
SET−UP
USB
MODE
CCD−RAW
OFF
FRAMENO.
言語言語
/LANG.
ENGLISH
CONT.
SET CANCE
OKOK
BACK
01 03
02
108
6.3 USING FinePixViewer
Macintosh
5When the message appears, click the [OK]
button. Check your selection carefully since the
process cannot be cancelled once you click [OK]
button.
6Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Mac OS 9.2
Mac OS X
Uninstalling FinePixViewer
Quit FinePixViewer. Then drag the installed FinePixViewer folder to the Trash and select
“Empty Trash” in the “Special” menu.
Uninstalling Exif Launcher, FinePixViewer
1After you have quit Exif Launcher in “Exif Launcher Settings” in the FinePixViewer “Settings”
menu, move the Exif Launcher file from the “Startup Items” folder in the System folder to the
Trash. Then select “Empty Trash” in the “Special” menu.
2After you have exited FinePixViewer drag the installed FinePixViewer folder to the Trash.
Then click “Empty Trash” in the “Special” menu.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix F710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix F710 in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info