101066
33
Zoom out
Zoom in
Previous page
1/47
Next page
64
6
65
CONNECTING AT DSC MODE
(USB)
socket
DC IN 3V
socket
Camera
1
PC
(USB)
socket
2
01 02
03
04
1Load a SmartMedia containing photographed
images into your camera.
2Slide the Power switch sideways to switch the
camera on.
3Set the USB MODE setting in the SETUP
menu to DSC (P.58).
4Slide the Power switch sideways to switch the
camera off.
1Switch your computer on.
2Use the special USB cable to connect the camera to
your computer.
3Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera (P.68).
If you are connecting your camera to a Windows PC
for the first time, the Add New Hardware Wizard
window opens and driver software installation
begins (Software Quick Start Guide booklet).
!
You should use the AC power adapter when the camera
is connected to your computer (P.21). Loss of power
during data transmission can prevent successful data
downloading.
!
Ensure that you insert the USB cable plugs into the
correct sockets.
!
Push the cable plugs firmly into the connector sockets.
!
Switch the camera off when you change the
SmartMedia (P.68).
!
Do not disconnect the USB cable when the camera
is communicating with the computer. See P.68 for
information on the disconnection procedure.
i The viewfinder lamp alternately blinks green
and orange while the camera is
communicating with your computer.
i DSC appears on the LCD monitor.
i Power Save/Auto Power Off does not function
when a USB connection is being used.
i FinePixViewer automatically starts up.
i A removable disk icon appears and you can
use your computer to transfer files to and from
the camera.
Camera Operation Computer Operation
Windows Macintosh
Screen for Windows 98 SE
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your computer. Refer to the
Software Quick Start Guide booklet and
complete the required computer setup
procedures. Then reconnect the camera to your
computer.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 2600 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info