101066
32
Zoom out
Zoom in
Previous page
1/47
Next page
6
6362
POWER SAVE
SET–UP
6
PC Connection
IN PC CONNECTION
Once you enable this function, the LCD monitor
is temporarily switched off to save power if you
do not use the camera for 30 seconds, Use this
function to gain the maximum possible run time
from your batteries.
!
The charging time for the flash increases slightly
because the flash charging power is reduced.
When the Power Save function is operating,
press the shutter button down halfway to return
the camera to the ready to shoot status. This is
a useful feature as it allows you to take pictures
more quickly than switching the camera off and
then on again.
!
When the Power Save function is operating,
pressing the shutter button down fully returns the
camera to the ready to shoot status and takes the
picture.
!
Power Save/Auto Power Off does not function when
a USB connection is being used.
!
Operation can also be restored by pressing buttons
other than the shutter button.
Sleep mode does not operate when the LCD
monitor is switched off, during playback mode or
during SETUP, but the camera does
automatically switch off if it is not used for
approximately 2 minutes (AUTO POWER OFF).
DSC Mode
PC Connection describes how to set up a USB connection and provides an overview of the functions
available using a USB connection. Refer also to the Software Quick Start Guide booklet.
This mode provides a simple way to read images
from a SmartMedia and store images on to a
SmartMedia (P.64).
PC CAM
(
camera
)
Mode
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
This function can also be used to record video on a
PC (P.66).
!
Videoconferencing is not supported on
Macintosh computers.
The First Time You Connect Your Camera to a Computer
You must set up your computer as described below. Refer also to the Software Quick Start Guide booklet.
Windows
1Load the enclosed CD-ROM into your PC
s CD-ROM drive and install the application software.
2With the CD-ROM loaded into your PC, select DSC connection mode and install the driver software.
3With the CD-ROM loaded into your PC, select PC CAMERA connection mode and install the driver
software.
Macintosh
Load the enclosed CD-ROM into the CD-ROM drive and install all the software.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 2600 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info