540674
60
Zoom out
Zoom in
Previous page
1/67
Next page
CARBON FRAME GUIDE
Please read the following instructions. If you have any doubt regarding your mechanical ability, visit your local authorized
Fuji dealer. Fuji recommends that the seat post be installed according to recommended torque specification by a qualified
mechanic.
Warning: Failure to follow any warning may result in a catastrophic failure of the seat post, resulting in serious injury or
death. This phrase may not be repeated in connection with each warning.
Assembling a complete bicycle is a complicated task. Only a trained and experienced bicycle mechanic should install
components to this frame.
Warning: Bicycle assembly requires training and experience. If you do not have the experience and training as a bicycle
mechanic, DO NOT attempt the assembly of this bike. Failure to follow this warning may result in serious injury or death.
Follow all torque specifications to ensure the best assembly possible and to prevent any damage to the components or frame.
For correct torque specifications as well as recommended loads that the contact points of the frame are capable of accepting,
please refer
to the owner’s manual.
Warning: Failure to follow torque specifications will void your warranty. It may also damage the frame, which may not be
visible to the eye. If there is damage to the frame, this can result in loss of structural integrity, which may result in serious
injury or death.
All bicycle components should be compatible with each other (i.e. handlebar, handlebar stem, seat post, saddle, brakes, etc.).
Any doubt regarding compatibility should be addressed with an authorized Fuji dealer.
Warning: You should never clamp the frame when placing this bike in a repair stand. Always clamp the seat post.
Clamping the frame can cause serious damage to the frame which may not be visible. This will impair the structural
integrity of the frame. Failure to follow this warning may result in serious injury or death.
Your Fuji frame does not require any pre-installation preparation to the bottom bracket or head tube. Surfaces are prepared at the
factory. Grease will still need to be placed on the bottom bracket threads and the head set cups. If necessary, you may need to
chase the bottom bracket threads.
BOTTOM BRACKET:
Clean and grease bottom bracket shell threads before installing. Recommended torque is 442 in-lbf (50 N-m). Do not exceed
maximum torque of 670 in-lbf (70 N-m).
56
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuji Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuji Bike in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info